Viessmann Vitodens 200-W B2HA 100 Technical Data Manual page 20

Boiler Mounting
Models B2HA 112, 150
The Vitodens 200-W, model B2HA does not come with a mounting template. The wall location for the frame, mounting
bracket and all vents must be field calculated.
20
Vitodens 200-W B2HA 100 to 150 Technical Data
Boiler mounting bracket and frame
1. Attach the wall mounting bracket (supplied with the
boiler) to the boiler mounting frame using the supplied
hardware. Ensure that the wall mounting bracket is
level.
2. Move the rack into position and secure to the floor
(and to the wall if needed).
IMPORTANT
When using the boiler restraint brackets, follow the
instructions supplied with the restaints prior to installing
the mounting bracket.
1. Remove the external accessories connection box
cover.
2. Loosen the screws at the bottom of the boiler
(do not remove completely).
3. Remove the front encloser panel (lift up and pull
away from the boiler).
4. Mount boiler onto the mounting bracket and ensure
the boiler is securely mounted.
5. Adjust the levelling screws to ensure the boiler
is level.
6. Connect the boiler to the installation fittings.
CAUTION
The boiler must be level both vertically and horizontally
to ensure proper draining of the condensate.