Advertisement
With the Ultrasonic Jewelry Cleaner unplugged, take the basket
out of the tank and then grasp the ultrasonic with both hands
and with the cover open, carefully pour out the old solution
into your sink and drain. Wash all dirt and residue from the
tank's bottom with clean water and a standard household
non-ammoniated, non-acidic cleaning solution or stainless steel
cleaner and a paper towel. Rinse the tank out with clean water
while being careful not to allow water to overflow onto other
parts of the machine as damage to its electronics may result
and the warranty will become void.
The Ultrasonic Jewelry Cleaner's outer shell may also be
cleaned using a standard household non-ammoniated, non-acidic,
non-abrasive cleaning solution and a paper towel. After cleaning
the outer shell, wipe off the remaining solution with clean water.
Avoid placing too much cleaning solution on the outer shell as
the excess solution may seep into the ultrasonic's electronics
potentially causing damage. DO NOT submerge the Ultrasonic
Jewelry Cleaner into water as damage to its electronics may
result and the warranty will become void.
6
Advertisement
