Advertisement
suggestion, in the event small items such as diamond ear
studs, charms or small pieces of jewelry require cleaning, a
household stainless steel tea strainer or fine mesh stainless
steel basket may be used to hold these items safely during
the cleaning process, with the tea strainer then being placed
in the supplied basket.) DO NOT place items to be cleaned
directly on the tank bottom, as damage to the transducer may
occur. Damage to the transducer as a result of placing items
on the bottom of the tank will void the warranty. Dents and
scars on the tank's bottom are evidence of items being placed
inappropriately in the tank without a basket.
5. Press the POWER button to start the cleaning process. While
on, press the TIMER button to scroll through the five cleaning
cycle times of 90, 180, 280, 380 or 480 seconds. Once the
cleaning cycle has ended, the Ultrasonic Jewelry Cleaner will
automatically shut off. Items that require additional cleaning
may be left in the basket within the tank and the process
repeated. Once the cleaning process has been completed,
always rinse the item off with water to remove the remaining
solution (as it may irritate your skin) and to dislodge/remove
any remaining loosened dirt from its surface. DO NOT place
fingers or other body parts in the tank while the Ultrasonic
Jewelry Cleaner is operating.
4
Advertisement
