Status 8
Blinking Green 0.25 second On/
0.25 second off
Status 9
Steady Red
Note
•
If the LED is blue for a short time during boot up, this means that the system is starting boot up.
1.8 Hardware Key
WPS/RESET
Wireless network connect by
Button
WPS
System reset (Factory default)
Call Button
Communication call
1.9 Communication IP Camera Call (KX-NTV150)
Using SIP Outgoing Call function, bidirectional voice communication and 1 way (Communication IP Camera
® other PBX terminal) video communications are executed between the Communication IP Camera and the
other PBX terminal.
1.
Make a call
•
There are 2 ways to establish a voice communication with a Communication IP Camera.
a.
Make a call from the Communication IP Camera to internal/external line.
b.
Make a call from an internal line to the Communication IP Camera.
2.
Make a call from the IP Camera
Feature
Feature
KX-NTV150
Restoring default
During system boot,
No network connection
KX-NTV150
Push button more than 2
seconds
Push button more than 30
seconds. Also reset
executable by
configuration menu on
WEB access
Outgoing call
Call cancel
1 Operations
KX-NTV160
KX-NTV160
–
Push button more than 30
seconds. Also reset
executable by
configuration menu on
WEB access
Outgoing call
User's Manual
27