Table of Contents
Advertisement
Setting the Viewfinder Information Display
3
The shooting function settings (Shooting mode, Metering mode, White
balance, Drive mode, AF operation, Flicker detection) can be displayed
in the viewfinder.
By default, only Flicker detection is checkmarked [X].
When you press the <W>, <o>, <Q>, or <B> button,
operate the lens's focus mode switch, or when a lens equipped with an
electronic manual focusing function is used and the AF/MF switches as the
lens's focusing ring is turned (p.124), the respective information will appear
in the viewfinder regardless of whether it is checkmarked.
84
Select [Viewfinder display].
1
Under the [52] tab, select
[Viewfinder display], then press
<0>.
Select [Show/hide in viewfinder].
2
Checkmark [X] the information to
3
be displayed.
Select the information to display and
press <0> to add a checkmark [X].
Repeat this procedure to add a
checkmark [X] to all the information
to be displayed. Then select [OK].
When you exit the menu, the
checkmarked information will appear
in the viewfinder (p.31).
Advertisement
Table of Contents
