Table of Contents
Advertisement
Auto Reset
Restarts the file numbering from 0001 each time the card is
replaced or a new folder is created.
When you replace the card, create a folder, or switch the target card
(such as f9g), the file numbering continues in sequence from 0001
for the images saved. This is useful if you want to organize images by
cards or folders.
If the replacement card or existing folder already contains images
recorded previously, the file numbering of the new images may
continue from the file numbering of the existing images on the card or in
the folder. If you want to save images with the file numbering starting
from 0001, use a newly formatted card each time.
File numbering after replacing the card
Card A (f)
0051
File numbering is reset
Manual Reset
Resets the file numbering to 0001 or to start from file number 0001
in a new folder.
When you reset the file numbering manually, a new folder is created
automatically and the file numbering of images saved to that folder
starts, from 0001.
This is useful, for example, if you want to use different folders for the
images taken yesterday and the ones taken today. After the manual
reset, the file numbering returns to continuous or auto reset. (There will
be no manual reset confirmation dialog.)
If the file number in folder 999 reaches 9999, shooting will not be possible
even if the card still has storage capacity. The LCD monitor will display a
message telling you to replace the card. Replace it with a new card.
File numbering after creating a folder
Card B (g)
0001
3 File Numbering Methods
Card A
100
101
0051
0001
207
Advertisement
Table of Contents
