Table of Contents
Advertisement
Changing Cases' Parameter Settings
You can manually adjust each case's three parameters: 1. Tracking
sensitivity, 2. Acceleration/deceleration tracking, and 3. AF point auto
switching.
In step 2, if you press the <J/K> button, then press the <L> button,
you can revert the 1, 2, and 3 parameter settings above for each case to
their defaults.
You can also register the 1, 2, and 3 parameter settings to My Menu
(p.463). Doing so will change the selected case's settings.
When shooting with a case whose parameters you adjusted, select the
adjusted case, then take the picture.
3 Selecting AI Servo AF Characteristics
Select a case.
1
Turn the <5> dial to select the icon
of the case you want to adjust.
Press the <J/K> button.
2
The selected parameter will be
highlighted with a purple frame.
Select the parameter to adjust.
3
Select the parameter to adjust, then
press <0>.
If you select [Tracking sensitivity] or
[Accel./decel. tracking], the setting
screen will appear.
Make the adjustment.
4
Adjust the setting, then press <0>.
The adjustment is saved.
The default setting is indicated by the
light gray [C] mark.
To return to the screen in step 1,
press the <J/K> button.
121
Advertisement
Table of Contents
