Memory Seats - Chevrolet Silverado 2016 User Manual

62 Seats and Restraints
To return the seatback to the upright
position:
1. Lift the lever fully without
applying pressure to the
seatback, and the seatback will
return to the upright position.
2. Push and pull on the seatback
to make sure it is locked.
Power Reclining Seatbacks
To recline a power seatback,
if equipped:
Tilt the top of the control
rearward to recline.
Tilt the top of the control forward
to raise.

Memory Seats

Crew/Double Cab Shown, Other
Models Similar
If memory equipped, the SET, 1, 2,
and (Exit) buttons on the driver
door are used to manually store and
recall memory settings for the driver
seat, outside mirrors, and adjustable
pedals (if equipped).
Storing Memory Positions
To store positions to the 1 and 2
buttons:
1. The ignition must be in ON/
RUN or ACC/ACCESSORY.
2. Adjust the driver seat, outside
mirrors, and adjustable pedals
(if equipped) to the desired
driving positions.
3. Press and release SET. A beep
will sound.
4. Immediately press and hold 1
until two beeps sound.
5. Repeat Steps 1 4 for a second
driver using 2.
To store positions to the
button and easy exit features,
repeat Steps 1 4 above using
store your positions for getting out
of the vehicle.
Manually Recalling Memory
Positions
Press and hold 1, 2, or
manually recall the previously
stored memory positions. Releasing
1, 2, or before the stored
positions are reached stops the
recall.
(Exit)
to
(Exit) to