Replacing The Solid-State Drive; Procedure; Post-Requisites - Dell XPS 12 Service Manual

Replacing the solid-state drive

WARNING: Before working inside your tablet, read the safety
information that shipped with your tablet and follow the steps in
Before working inside your
follow the instructions in
safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
CAUTION: Solid-state drives are fragile. Exercise care when handling
the hard drive.

Procedure

1 Slide the solid-state drive into the slot on the system board.
2 Align the screw hole on the solid-state drive with the screw hole on the
back-cover assembly.
3 Replace the screw that secures the solid-state drive to the back-cover
assembly.

Post-requisites

Replace the battery.
tablet. After working inside your tablet,
After working inside your tablet. For more
17