Removing The Internal Storage Device (Solid
State Drive)
1.
Follow the procedures in
2.
Remove the
label
door.
3.
Remove the
bottom
cover.
4.
Disconnect the battery cable.
5.
Remove the screw that secures the solid state drive to the computer.
6.
Lift the solid state drive diagonally and remove it from the computer.
Installing The Internal Storage Device (Solid State Drive)
1.
Insert the internal storage device (solid state drive) into its slot.
2.
Tighten the screw that secures the internal storage device connection.
3.
Connect the battery cable.
4.
Install the
bottom
cover.
5.
Install the
label
door.
6.
Follow the procedures in
Before Working On Your
Computer.
After Working Inside Your
Computer.
11
33