Scanning A Document - Fujitsu ScanSnap S1100i Basic Operation Manual

Scanning a Document

The procedure for scanning documents by inserting one document at a time is as follows.
For details about documents that can be scanned, refer to
1.
Open the feed guide of the ScanSnap.
HINT
l If you want the document to be ejected from the front of the ScanSnap or when there is not
enough space where the document exits the ScanSnap, open the output guide.
For details about documents that can be scanned with the output guide open, refer to
"Documents to Scan" (page
l How the document is ejected differs as below depending on whether the output guide is open
or closed.
- When the output guide is closed
- When the output guide is open
a The [Scan/Stop] button flashes in blue. The button returns to being lit normally when
document scanning is enabled.
In addition, the ScanSnap Manager icon in the Dock changes from
2.
Insert the document straight into the feeding section of the ScanSnap, with
the scanning side facing up.
Feed Guide
47).
Output Guide
17
"Documents to Scan" (page
Scanning a Document
47).
to .