Level; Programming Scan List - Motorola XTNID User Manual

PROGRAMMING MICROPHONE
ACCESSORY GAIN LEVEL
To configure the Accessory Microphone Gain
Level, enter 'Programming Mode' and scroll
through the programming options by short
pressing the PTT button.
MIC
The current accessory microphone gain level
setting will be blinking. You can select the
desired gain level (1=Low gain,2= Medium
gain or 3= High gain) by pressing the
buttons. Once you have selected the
gain level you want to program, long press the
PTT button to exit and save or short press the
PTT button to move to the next programming
feature without saving.
44
English
Note: The values available for accessory
microphone gain level are dependent upon
maximum levels the radio supports.

PROGRAMMING SCAN LIST

You can enable/disable the Channel Scanning
feature for each one of the channels in your
radio. To do so, enter 'Programming Mode' and
select the channel you want to program. Scroll
through the programming options by short
pressing the PTT button until you reach the
'Scan Programming Mode'. The radio display
will show the scan icon
/
Both the channel number and current scan
setting (YES=ON or NO=OFF) will be blinking
as follows:
YES