End Of Transmission Tone; Tone); Keypad Beeps; Menu Options - Motorola XTNID User Manual

Motorola two-way radio user manual
Hide thumbs Also See for XTNID:
Table of Contents

Advertisement

End of Transmission Tone (Roger Beep

Tone)

Short press the SB1 button while turning ON
the radio to enable/disable End of
Transmission Tone.
Note: This setting is set to OFF by default.

Keypad Beeps

Keypad Beeps can be enabled/disabled by
short pressing SB2 button (until radio beeps a
"chirp") while turning ON the radio.
Setting VOX/iVOX Sensitivity
The sensitivity of the radio's accessory or
microphone can be adjusted during VOX/iVOX
operation to suit different operating
environments. VOX/iVOX sensitivity can be
programmed via the CPS.
1 = Low sensitivity
2 = Medium sensitivity
3 = High sensitivity
Keypad Lock/Unlock
You can lock the keypad to avoid accidentally
changing your radio settings. Press and hold
MENU for 4 seconds to lock the radio keypad.
To unlock, press MENU for 4 seconds.
Note: The only buttons that will be not locked using
this feature will be PTT and Button A (if Call
Tone feature has been assigned).

MENU Options

To enter MENU, short press MENU button. The
radio will take you to the next feature option.
For each feature, you can navigate with the
/
buttons. After selecting your desired
settings, you can:
press MENU to save and go to the next option
33
English

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents