Motorola XTNID User Manual page 39

Press MENU buttons as many times as
needed until the radio displays the solid letters
"MIC" on and blinks the current radio
microphone gain.
The VOX icon will be displayed. Press the
toggle up/down button to cycle through the
microphone gain settings which are similar to
the Microphone Gain Menu. Once you have
selected the value you want to set (1=low
gain,2= Medium gain or 3= high gain), press
MENU again to save and go to the next step or
turn the radio OFF to exit without saving
changes. Microphone Accessory Gain can be
also be configured using CPS.
Scan List Menu
Note: If the MAX CHAN setting in the radio is set
up to 1 (which can be done using CPS) the
Scan Menu will be disabled.
In Scan List Menu you can enable the Channel
Scanning feature for a specific channel
frequency for the radio. To enter Scan Menu,
press MENU button as many times as needed
until the radio display the channel number with
the solid CHAN icon and blink the current
setting "YES" or "NO". The SCAN icon
be also displayed solid:
Press the toggle
through all the channels. Press SB2 button to
set SCAN to "YES" or "NO" settings. Once you
have selected the value you want to set, press
MENU again to save and go to the next step or
Turn OFF radio to exit without saving changes.
Scan List Menu can be also be configured
using CPS.
will
YES
/ buttons to cycle
37
English