Self-Diagnosis Function And Service Modes; Self-Diagnostic Function For Loading Mechanism; How To Enter The Mode And Display; Canceling Self-Diagnostic Function - Technics RS-DV290EG Service Manual

7. Self-Diagnosis Function and Service Modes

Each results of self-diagnostic function and service mode is displayed on the LCD of Tuner /
Amplifier (SA-DV290). When using these function, confirm the unit to be connected by system
cable.

7.1. Self-diagnostic function for loading mechanism

7.1.1. How to enter the mode and display

1. Turn on the power.
2. Press "SELECT" button on the Tuner / Amplifier (SA-DV290) to
select DVD.
3. With no disc on the unit, hold down REPEAT button for at least 2
seconds, and then press
4. A loading mechanism error code is displayed if any. (No error is
detected, "
--
Table 7-1. If there are multiple error, they canbesuccessivelyby
pressing

7.1.2. Canceling self-diagnostic function

- Press "Standby/on" button to turn off. And then press "Standby/on"
button again to turn it on again.
7.1.3. Clearing self-diagnostic function
- After repairing, continue to press
seconds in the situation of having displayed the error code. /
(Clearing the contents of self-diagnostic function)
- Always be sure to clear memories after completing repair.
T --- " is displayed.
-- ----
(F-SKIP) button.
(STOP) button for at least 2 seconds.
indicates a space.) Refer to
-
(STOP) button for at least 5
36