Honda 1995 Civic Owner's Manual page 158

6. Install the new bulb. Test it to
make sure it works.
7. Reinstall the brake light assembly.
Tighten the two screws securely.
8. Reinstall the cover under the
brake light assembly.
Replacing a Rear License Bulb
1. Use a Phillips-head screwdriver to
remove the two screws holding
the license plate light assembly to
the bracket. Pull the assembly
away from the bracket.
2. Remove the socket from the light
assembly by turning it one-quarter
turn counterclockwise.
3. Pull the bulb straight out of the
socket.
4. Install the new bulb. Test it to
make sure it works.
5. Reinstall the light assembly on the
bracket. Install the mounting
screws and tighten them securely.
Maintenance
Lights