Honda 1995 Civic Owner's Manual page 155

Lights
4. Remove the bulb by pushing it in
slightly and turning it counter-
clockwise.
5. Install the new bulb in the socket.
Turn it clockwise to lock it in place.
6. Insert the socket back into the
lens. Turn it clockwise to lock it in
place.
7. Turn on the parking lights to
make sure the new bulb works.
8. To reinstall the light assembly in
the fender, line up the guide on
the assembly with the metal tab
next to the headlight and line up
the fingers on the light assembly
with the holes in the fender. Push
the light assembly straight back.
9. Install the mounting screw and
tighten it securely.
Maintenance
Replacing Rear Bulbs
(in Fenders)
1. Open the hatch and tailgate.
2. Remove the cover from the inside
panel by pulling on its edge.
3. Determine which of the three
bulbs is burned out: tail/stoplight,
turn signal, or side marker.
Remove the socket for that bulb
by turning it counterclockwise.
4. To remove either the tail/stoplight
bulb or the turn signal bulb, push
it in slightly and turn it counter-
clockwise. To remove the side
marker bulb, pull it straight out of
the socket.