Specifications - Makita HP2041 Instruction Manual

ENGLISH
1. Switch trigger
2. Lock button
3. Reversing switch lever
4. Speed change lever
5. Action mode changing button

SPECIFICATIONS

Model
Speed
Capacities
No load speed (min
Blows per minute
Overall length
Net weight
Safety class
• Due to our continuing programme of research and development, the specifications herein are subject to change without
notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
.... Read instruction manual.
.............. DOUBLE INSULATION
Intended use
The tool is intended for impact drilling in brick, concrete
and stone as well as for drilling without impact in wood,
metal, ceramic and plastic.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated in accordance with European Standard
and can, therefore, also be used from sockets without
earth wire.
General Power Tool Safety
Warnings
WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings and
4
Explanation of general view
6. Teeth
7. Grip base
8. Side grip
9. Protrusions
10. Sleeve
High
Concrete 20 mm
Steel 8 mm
Wood 25 mm
-1
) 0 - 2,900
0 - 37,700
END201-5
ENE039-1
ENF002-1
GEA005-2
HP2040/HP2041
Low
-----
13 mm
40 mm
0 - 950
0 - 12,400
364 mm
2.6 kg
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause you
to lose control.
Electrical safety
4. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
5. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
6. Do not expose power tools to rain or wet
conditions. Water entering a power tool will increase
the risk of electric shock.
11. Ring
12. Chuck key
13. Depth gauge
14. Blow-out bulb
15. Vent hole
HP2042
High
20 mm
8 mm
25 mm
2,900
37,700
364 mm
2.6 kg
/II
Low
-----
13 mm
40 mm
950
12,400