Customer And Programming Menu - Gaggia Brera Service Manual

GAGGIA
3.1.

Customer and programming menu

Indications
Machine at correct temperature
- for coffee bean dispensing
- for hot water dispensing
Steady on
Machine at correct temperature
- for ground coffee dispensing
(pre-ground)
Steady on
Machine dispensing steam
Steady on
Machine dispensing
hot water
Steady on
Machine dispensing
a coffee
Steady on
Machine dispensing
two coffees
Steady on
The machine is being programmed with
the coffee cup fill level
Blinking
Machine in pre-heating phase for coffee,
hot water and steam dispensing
Blinking
Rev. 00 OCTOBER 2009
Causes
03 BRIEF INSTRUCTIONS
Solutions
Proceed with the dispensing process
Proceed with the dispensing process
Proceed with steam dispensing
Proceed with hot water dispensing
Wait for the dispensing process to end
(dispensing stops when you press the
key again)
Wait for the dispensing process to end
(dispensing stops when you press the
key again)
Stop dispensing as desired
Wait until heated
(see bar)
01
Page / 03