AT&T CL84109 User Manual page 68

Answering system
Remote access
NOTES:
1. If you do not enter a valid remote access code, the system answers the call automatically.
2. If you pause for more than four seconds during remote access, you hear a help menu listing
all features and commands. If there is no command for another 20 seconds, the call ends
automatically.
3. If you want to delete all the old messages remotely, press 3 twice in remote standby mode.
4. If the memory is full, the answering system answers after 10 rings and announces, "Memory is
full. Enter the remote access code." Enter your remote access code to access the messages and
announcements.
62