Special Radio Features; Dynamic Regrouping - Motorola BASIC XTS 3000 User Manual

Special Radio Features

Dynamic Regrouping

The dynamic regrouping feature allows the dispatcher to temporarily
reassign selected radios to a single special channel so that they can
communicate with each other. This feature, enabled in each radio by means
of the radio service software, is typically used during special operations. You
will not notice whether your radio has this feature enabled until a dynamic
regrouping command is sent by the dispatcher.
If you select the dynamic-regrouping zone/channel using radio
Note
controls without being dynamically regrouped, an invalid tone
will be heard.
1. When your radio has been dynamically regrouped, you will hear a
"gurgle" tone (unless you are already on the dynamic-regrouping
zone/channel), and your radio will be automatically switched to the
dynamic-regrouping channel.
If you are using a radio control knob or switch to select the
Note
zone or channel — Until you select the correct dynamic-
regrouping position, you will not be able to select scan,
telephone call, or Private Conversation call feature, and you
will hear a gurgle tone each time you press the PTT Switch.
This is a reminder to you that you are transmitting on the
dynamic-regrouping channel, not the zone or channel
indicated by the position of the radio control.
Exception to this Note
correct dynamic-regrouping position, you can change the
radio's zone or channel knob/switch position, press the PTT
Switch, which will transmit on the dynamic-regrouping zone/
channel, and you will not hear the "gurgle" tone.
If your radio is programmed as a select-
enabled radio — Once you select the
4
25