Panasonic GD90 Service Manual page 46

TEST AND MEASUREMENT
5. Select VIEW TRIM PL MCH, and make a note of this value.
6. Perform the following calculation and make a note of the result:
New Trim value = Old Trim Value + (Required Power - Measured Power) X Change per dB
(step 5)
Make a note of the result.
7. At the Channel box press F6 to program the TRIM for the mid-channel.
Issue 1
Revision 0
Figure 6.15: Power level view 2
(table) (step2)
Figure 6.16: Power level selection 1
Section 6
– 40 –
(table)
MCUK990801C8
Service Manual