Panasonic GD90 Service Manual page 37

6. RF Adaptor
Part Number: JT00013
This unit provides an RF connection between the Unit Under Test and external test equipment. It has a lug on the back to
allow both Adaptor and Unit Under Test to be suspended from a suitable rack or channel bracket, if required.
7. GSM Tester
This unit acts as a base station providing all the necessary GSM signalling requirements and also provides GSM signal
measuring facilities.
8. Interface Cable
Part Number: JT00004
The interface cable allows connection between a computer and the Unit Under Test via IFB003.
9. Channel Box Software
This is the test software for the GD90 unit and should be installed onto the personal computer to be used for testing.
MCUK990801C8
Service Manual
Figure 6.4: RF Adaptor
Figure 6.5: Interface Cable
Section 6
– 31 –
TEST AND MEASUREMENT
Issue 1
Revision 0