Receiving A Phone Call; Ending A Phone Call - Motorola PCS telephone Quick Reference

Receiving a Phone Call

To receive a phone call:
• Your phone must be switched on and unlocked.
• You must be in an area where there is PCS service.
• Your Call Forwarding and Call Barring settings should not be
set to forward or bar incoming calls.
When your phone receives a call, it will ring or vibrate. To answer
a call, extend the antenna, then open the phone.
If you wish to open the phone without answering calls, set
to . Then, if your network offers Caller Line
Answer Only On
Identification and you are a subscriber, you can open your phone
to review the number or name of the caller before you answer. To
answer a call with Key Answer Only activated, press O, 1
through 9, or >. To reject the call, press C.
Your phone automatically searches your Phone Book for the
caller's number. If the number matches an entry in your Phone
Book, the name associated with the number is displayed instead.
To answer the call, press O. If
you can also press 1 through 9 or >.
Key
Key Answer Only is active,
If your phone is open and you do not want to answer the call,
you can:
Press and release C.
•
The caller is either sent to a forwarding number (see
'Detailed Forwarding' on page 40) or hears a busy tone.
or
Press and hold C. This will reject the incoming call. No call
•
forwarding option will be offered in this case.
If your phone rings and you do not answer it, the message
Unanswered Call will be displayed the next time you open the
phone, so that you know someone tried to call you.
If you subscribe to CLI, you can view the names or numbers of
A
your unanswered calls in the Last 10 Calls Received list.

Ending a Phone Call

To end a phone call, press O or close the phone.
Making and Receiving Phone Calls
21