Cd Synchronised Start Recording; Dubbing Tapes - Philips FW-C155 Owner's Manual

Tape Operation/Recording

CD Synchronised start recording

1
Press CD 1/2/3 to select the disc.
You can programme the tracks in the order you
want them to be recorded (refer to "CD
Operation - Programming the disc tracks").
2
Press on tape deck 1 to start recording.
The disc will start playback automatically.
To stop recording
Press 70 on tape deck 1, then press Ç to stop
disc playback.
Note:
– During CD synchronised start recording, do not
fast forward/rewind the tape in tape deck 2.

Dubbing tapes

1
Load the prerecorded tape in tape deck 2.
Make sure both tapes have their full spool to the
left.
2
Press Å on tape deck 1 and followed by
3
PressÉ on tape deck 2.
Recording will start automatically.
Dubbing of tapes is possible on one side of the
tape only. To continue recording on the reverse
side, at the end of side A, flip the tape to side B
and repeat the procedure.
To stop dubbing
Press 70 on tape deck 1 and 2.
Notes:
– Dubbing of tapes is possible only from tape
deck 2 to tape deck 1.
– To ensure good dubbing, use tapes of the same
length.
22
.