Cd Synchronised Start Recording; Dubbing Tapes - Philips FW-C399/21M User Manual

Tape Operation/Recording

CD Synchronised start recording

1
Press CD to select the disc.
Press í or ë to select the desired track to
start recording.
You can programme the tracks in the order you
want them to be recorded (refer to "CD
Operation - Programming the disc tracks").
2
Press RECORD to start recording.
The disc will start playback automatically.
To select another track during recording
1 Press É Å to interrupt recording.
2
Pressí or ë to select the desired track.
3
Press É Å to resume recording.
To stop recording
Press Ç.
Recording and disc playback will stop
simultaneously.

Dubbing tapes

1
Load the prerecorded tape in tape deck 1.
You can set the tape to the desired passage
where recording will start.
2
Press DUBBING.
Playing and recording will start simultaneously.
"DUB" is displayed.
Dubbing of tapes is possible on one side of the
tape only. To continue recording on the reverse
side, at the end of side A, flip the tape to side B
and repeat the procedure.
To stop dubbing
Press Ç.
Notes:
– Dubbing of tapes is possible only from tape
deck 1 to tape deck 2.
– To ensure good dubbing, use tapes of the same
length.
– You can listen to another source while dubbing.
22
pg 001-028/C399/21-Eng 22
3139 115 21121
4/16/02, 4:56 PM