D-Link Air Xpert DI-774 Manual page 9

2.4 ghz / 5 ghz tri-mode dualband
Hide thumbs Also See for Air Xpert DI-774:
Table of Contents

Advertisement

Using the Configuration Menu
Home > WAN > Static IP Address
Static IP Address-
select this option to set static IP information provided to you
by your ISP.
IP Address-
input the IP Address provided by your ISP
input your Subnet mask. (All devices in the network must
Subnet Mask-
have the same subnet mask.)
ISP
input the Gateway address
Gateway Address-
enter a DNS Address if you do not wish to use the one pro-
Primary / Secondary
vided by your ISP.
DNS Address-
enter an MTU value only if required by your ISP. Otherwise,
MTU-
leave this section to its default setting of 1500.
16
Using the Configuration Menu
Home > WAN > PPPoE
Please be
sure to
remove any
existing
PPPoE client
software
installed
on your
computers.
Choose this option if your ISP uses PPPoE. (Most DSL users
PPPoE-
will select this option.)
Dynamic PPPoE-
your ISP.
Static PPPoE-
User Name-
your PPPoE username provided by your ISP.
Password-
your PPPoE password provided by your ISP.
Retype Password-
re-enter the PPPoE password
Service Name-
enter the Service Name provided by your ISP (optional).
IP Address-
this option is only available for Static PPPoE. Enter the static IP
Address for the PPPoE connection.
receive an IP Address automaticcally from
you have an assigned (static) IP Adress.
17

Advertisement

Table of Contents
loading

Table of Contents