Radiator And Condenser; Brake Fluid; Checking Fluid Level - Toyota 2010 Corolla Owner's Manual

NOTICE
When adding engine coolant
■
Coolant is neither plain water nor straight antifreeze. The correct mixture of
water and antifreeze must be used to provide proper lubrication, corrosion
protection and cooling. Be sure to read the antifreeze or coolant label.
If you spill coolant
■
Be sure to wash it off with water to prevent damage to parts or paint.

Radiator and condenser

Check the radiator and condenser and remove any foreign objects.
If any of the above parts are extremely dirty or you are not sure of
their condition, have your vehicle checked by your Toyota dealer.
CAUTION
When the engine is hot
■
Do not touch the radiator or condenser, as they may be hot and may cause
burns.

Brake fluid

Checking fluid level

■
4-3. Do-it-yourself maintenance
The brake fluid level should be
between the "MAX" and "MIN"
lines on the tank.
4
321