The Doors Cannot Be Locked When; Customization That Can Be Configured At Toyota Dealer - Toyota 2010 Corolla Owner's Manual

1-2. Opening, closing and locking the doors and trunk
Function
Shift position linked door lock-
*
1
ing function
Shift position linked door
unlocking function
Speed linked door locking func-
*
2
tion
Driver's door linked door unlock-
ing function
*
1
: Vehicles with an automatic transmission only
*
2
: Vehicles with smart key system
When the setting or canceling operation is complete, all doors are
locked and then unlocked.
When all the doors are locked with the wireless remote control, entry
■
function or key
The doors cannot be unlocked with the door lock switch.
The door lock switch can be reset by unlocking all the doors with the wire-
less remote control, entry function or key.

The doors cannot be locked when

■
Vehicles with smart key system
The "ENGINE START STOP" switch is in ACCESSORY or IGNITION ON
mode, or the electronic key is left inside the vehicle.
Depending on the position of the electronic key, the key may not be detected
correctly and the door may be locked.
Vehicles without smart key system
The key is in the engine switch and either of the front door is open.

Customization that can be configured at Toyota dealer

■
Settings (e.g. unlocking function using a key) can be changed.
(Customizable features →P. 452)
42
*
1
Shift lever Driver's door lock
position switch position
P
N