Wall Mount - Symbol DS6707 Product Reference Manual

1 - 5 Symbol DS6707 Digital Imager Scanner Product Reference Guide

Wall Mount

To use the optional wall mount to mount the digital imager scanner on a wall, place the mount in the desired
location on the wall and secure by inserting two screws* appropriate for the mounting surface through the screw
holes on the mount, and into the surface. Insert the digital imager scanner into the mount as shown.
Securing the Wall Mount
Figure 1-5
*The recommended screws are two #6 screws (1" long) and two #6 washers.
For convenience, print this page and use the template below for mounting hole locations.
Insert mounting screw
Wall Mounting Template
Figure 1-6
Insert mounting screw
2.98"