Page 1 Symbol DS6707 Digital Imager Scanner Product Reference Guide...
Page 3 Symbol DS6707 Digital Imager Scanner Product Reference Guide 72E-83978-06 Revision A May 2009...
Page 4 Motorola. No right to copy a licensed program in whole or in part is granted, except as permitted under copyright law. The user shall not modify, merge, or incorporate any form or portion of a licensed program with other program material, create a derivative work from a licensed program, or use a licensed program in a network without written permission from Motorola.
Page 5: Revision History
US4, changed code type name from UCC/EAN-128 to GS1-128 -05 Rev A 10/2008 Updated wall mount template, added separate dimensions and weight specifications for the Symbol DS6707-DP model, added custom defaults options, added specific string search and new move cursor options in ADF chapter -06 Rev A 5/2009 Added ISSN EAN, Matrix 2 of 5, and Chinese 2 of 5 code types, added ISBT concatenation parameters.
Page 6 Symbol DS6707 Digital Imager Scanner Product Reference Guide...
Page 7: Table Of Contents
Scanning with the Digital Imager Scanner ... 2-4 Aiming ... 2-6 Scanning in Presentation Mode ... 2-7 Decode Zones ... 2-8 Symbol DS6707-SR Standard Range Digital Imager Scanner - 1D Bar Codes ... 2-8 Symbol DS6707-SR Standard Range Digital Imager Scanner - 2D Bar Codes ... 2-9...
Page 8 Symbol DS6707-DP Direct Part Mark Digital Imager Scanner - 1D and PDF417 Bar Codes ... 2-12 Symbol DS6707-DP Direct Part Mark Digital Imager Scanner - 2D Bar Codes ... 2-13 Symbol DS6707-HD High Density Digital Imager Scanner - 1D and PDF417 Bar Codes ...
Page 9 Chapter 5: Imaging Preferences Introduction ... 5-1 Scanning Sequence Examples ... 5-2 Errors While Scanning ... 5-2 Imaging Preferences Parameter Defaults ... 5-2 Imaging Preferences ... 5-4 Operational Modes ... 5-4 Low Light Enhancement ... 5-5 Presentation Mode Field of View ... 5-5 Image Capture Autoexposure ...
Page 10 Symbol DS6707 Digital Imager Scanner Product Reference Guide Host Serial Response Time-out ... 6-10 Host Character Time-out ... 6-11 Multipacket Option ... 6-12 Interpacket Delay ... 6-13 Event Reporting ... 6-14 Decode Event ... 6-14 Boot Up Event ... 6-15 Parameter Event ...
Page 11 Chapter 9: 123Scan Introduction ... 9-1 123Scan Parameter ... 9-1 Chapter 10: Symbologies Introduction ... 10-1 Scanning Sequence Examples ... 10-1 Errors While Scanning ... 10-2 Symbology Parameter Defaults ... 10-2 UPC/EAN ... 10-7 Enable/Disable UPC-A ... 10-7 Enable/Disable UPC-E ... 10-7 Enable/Disable UPC-E1 ...
Page 12 Symbol DS6707 Digital Imager Scanner Product Reference Guide Set Lengths for Code 11 ... 10-38 Code 11 Check Digit Verification ... 10-40 Transmit Code 11 Check Digits ... 10-41 Interleaved 2 of 5 (ITF) ... 10-42 Enable/Disable Interleaved 2 of 5 ... 10-42 Set Lengths for Interleaved 2 of 5 ...
Page 13 Composite CC-A/B ... 10-67 Composite TLC-39 ... 10-68 UPC Composite Mode ... 10-69 Composite Beep Mode ... 10-70 GS1-128 Emulation Mode for UCC/EAN Composite Codes ... 10-70 2D Symbologies ... 10-71 Enable/Disable PDF417 ... 10-71 Enable/Disable MicroPDF417 ... 10-71 Code 128 Emulation ... 10-72 Data Matrix ...
Page 14 Symbol DS6707 Digital Imager Scanner Product Reference Guide Code Lengths ... 11-18 Message Containing A Specific Data String ... 11-22 Actions ... 11-27 Send Data ... 11-27 Setup Field(s) ... 11-30 Modify Data ... 11-37 Pad Data with Spaces ... 11-38 Pad Data with Zeros ...
Page 15 Table of Contents xiii Index Tell Us What You Think...
Page 16 Symbol DS6707 Digital Imager Scanner Product Reference Guide...
Page 17: About This Guide
About This Guide Introduction The Symbol DS6707 Digital Imager Scanner Product Reference Guide provides general instructions for setting up, operating, maintaining, and troubleshooting the Symbol DS6707 digital imager scanner. Configurations This guide includes the following digital imager scanner configurations: •...
Page 18: Notational Conventions
Symbol DS6707 Digital Imager Scanner Product Reference Guide • Chapter 6, SSI Interface (SSI) host. When using SSI, program the digital imager scanner via bar code menu or SSI host commands. • Chapter 7, USB Interface • Chapter 8, RS-232 Interface point-of-sale devices, host computers, or other devices with an available RS-232 port.
Page 19: Related Documents
Software type and version number Motorola responds to calls by e-mail, telephone or fax within the time limits set forth in service agreements. If your problem cannot be solved by Motorola Enterprise Mobility Support, you may need to return your equipment for servicing and will be given specific directions.
Page 20: Chapter 1 Getting Started
Chapter 1 Getting Started Introduction The Symbol DS6707 digital imager scanner combines superior 1D and 2D omnidirectional bar code scanning and sub-second image capture and transfer to provide the best value in a digital imager scanner. Whether in hand-held mode or presentation (hands-free) mode in a stand, the digital imager scanner ensures comfort and ease of use for extended periods of time.
Page 21: Supported Interfaces
Configuration via 123Scan. Unpacking Remove the digital imager scanner from its packing and inspect it for damage. If the scanner was damaged in transit, contact Motorola Enterprise Mobility Support. See It is the approved shipping container; use this to return the equipment for servicing.
Page 22: Setting Up The Digital Imager Scanner
Symbol DS6707 Digital Imager Scanner Product Reference Guide Setting Up the Digital Imager Scanner Installing the Interface Cable Plug the interface cable modular connector into the cable interface port on the bottom of the scanner handle. Figure 1-2. Gently tug the cable to ensure the connector is properly secured.
Page 23: Connecting Power (If Required)
Plug the power supply into the power jack on the interface cable. Plug the other end of the power supply into an AC outlet. Configuring the Digital Imager Scanner To configure the digital imager scanner, use the bar codes in this manual, or the 123Scan configuration program. Chapter 4, User Preferences & Miscellaneous Digital Imager Scanner Options Preferences for information about programming the digital imager scanner using bar code menus.
Page 24: Wall Mount
Wall Mount To use the optional wall mount to mount the digital imager scanner on a wall, place the mount in the desired location on the wall and secure by inserting two screws* appropriate for the mounting surface through the screw holes on the mount, and into the surface.
Page 25: Chapter 2 Scanning
Chapter 2 Scanning Introduction This chapter provides beeper and LED definitions, techniques involved in scanning bar codes, general instructions and tips about scanning, and decode zone diagrams. Beeper Parts Figure 2-1 Scan Window Trigger...
Page 26: Beeper Definitions
2 - 2 Symbol DS6707 Digital Imager Scanner Product Reference Guide Beeper Definitions The digital imager scanner issues different beep sequences and patterns to indicate status. sequences that occur during both normal scanning and while programming the digital imager scanner.
Page 27 Low/medium/high beeps The USB bus can put the digital imager scanner in a state where power to the occur more than once. digital imager scanner is cycled on and off more than once. This is normal and usually happens when the PC cold boots.
Page 28: Led Definitions
In addition to beep sequences, the digital imager scanner uses a two-color LED to indicate status. defines LED colors that display during scanning. Standard LED Definitions Table 2-2 No power is applied to the digital imager scanner, or the digital imager scanner is on and ready to scan. Green A bar code was successfully decoded.
Page 29 When the digital imager scanner senses movement, in its default Auto Aim trigger mode, it projects a red laser aiming pattern (Figure 2-3) which allows positioning the bar code or object within the field of view. (To turn off the default Auto Aim trigger mode, see turns on its red LEDs to illuminate the target bar code.
Page 30: Aiming
For the DS6707-DP, ensure part of the symbol is visible within the donut-shaped pattern. The aiming pattern is smaller when the digital imager scanner is closer to the symbol and larger when it is farther from the symbol. Scan symbols with smaller bars or elements (mil size) closer to the digital imager scanner, and those with larger bars or elements (mil size) farther from the digital imager scanner.
Page 31: Scanning In Presentation Mode
Connect the digital imager scanner to the host (see the appropriate host chapter for information on host connections). Insert the digital imager scanner in the Intellistand by placing the front of the digital imager scanner into the stand’s “cup” (see Figure Use the Intellistand’s adjustment knobs to adjust the height and angle of the digital imager scanner.
Page 32: Decode Zones
2 - 8 Symbol DS6707 Digital Imager Scanner Product Reference Guide Decode Zones Symbol DS6707-SR Standard Range Digital Imager Scanner - 1D Bar Codes Note: Typical performance at 73.4 F (23 C) on high quality symbols. DS6707-SR 5 mil (Code 39)
Page 33: Symbol Ds6707-Sr Standard Range Digital Imager Scanner - 2D Bar Codes
Symbol DS6707-SR Standard Range Digital Imager Scanner - 2D Bar Codes Note: Typical performance at 73.4 F (23 C) on high quality symbols. DS6707-SR 6.6 mil PDF417 10 mil QR Code PDF417 (10 mil) 10 mil MicroPDF 7.50 Datamatrix (10 mil) 7.50...
Page 34: Symbol Ds6707-Dc Document Capture Digital Imager Scanner - 1D Bar Codes
5 mil (Code 39) Postnet 10 mil I 2 of 5 13 mil (100% UPC/EAN) In . 12.7 Symbol DS6707-DC Document Capture Digital Imager Scanner Decode Zone for 1D Bar Codes Figure 2-10 In . 12.5 14.7 20 mil (Code 39) 21.4...
Page 35: Symbol Ds6707-Dc Document Capture Digital Imager Scanner - 2D Bar Codes
6.6 mil PDF417 10 mil QR Code 10 mil MicroPDF In . 12.7 Depth of Field Symbol DS6707-DC Document Capture Digital Imager Scanner Decode Zone for 2D Bar Codes Figure 2-11 In . PDF417 (10 mil) 11.1 Datamatrix (10 mil) 12.2...
Page 36: Symbol Ds6707-Dp Direct Part Mark Digital Imager Scanner - 1D And Pdf417 Bar Codes
2 - 12 Symbol DS6707 Digital Imager Scanner Product Reference Guide Symbol DS6707-DP Direct Part Mark Digital Imager Scanner - 1D and PDF417 Bar Codes Note: Typical performance at 73.4 F (23 C) on high quality symbols. DS6707-DP 3 mil Code 39 1.21...
Page 37: Symbol Ds6707-Dp Direct Part Mark Digital Imager Scanner - 2D Bar Codes
5 mil QR Code 7.5 mil QR Code 10 mil QR Code In . 1.27 2.54 Depth of Field Symbol DS6707-DP Direct Part Mark Digital Imager Scanner Decode Zone for 2D Bar Codes Figure 2-13 In . 0.75 1.27 0.25 0.64 0.25...
Page 38: Symbol Ds6707-Hd High Density Digital Imager Scanner - 1D And Pdf417 Bar Codes
0.63 10 mil PDF417 0.46 15 mil PDF417 1.33 In . Depth of Field Symbol DS6707-HD High Density Digital Imager Scanner Decode Zone for 1D and PDF417 Bar Codes Figure 2-14 In . c m 3.13 3.38 4.38 4.96 20 mil Code 39 8.21...
Page 39: Symbol Ds6707-Hd High Density Digital Imager Scanner - 2D Bar Codes
0.54 1.13 0.88 0.67 0.46 In . 1.27 2.54 Symbol DS6707-HD High Density Digital Imager Scanner Decode Zone for 2D Bar Codes Figure 2-15 4 mil Data Matrix 2.13 5 mil Data Matrix 2.50 7.5 mil Data Matrix 3.00 10 mil Data Matrix 3.50...
Page 40 2 - 16 Symbol DS6707 Digital Imager Scanner Product Reference Guide...
Page 41: Chapter 3 Maintenance & Technical Specifications
Chapter 3 Maintenance & Technical Specifications Introduction This chapter provides suggested scanner maintenance, troubleshooting, technical specifications, and signal descriptions (pinouts). Maintenance Cleaning the scan window is the only maintenance required. A dirty window can affect scanning accuracy. • Do not allow abrasive material to touch the window.
Page 42: Troubleshooting
3 - 2 Symbol DS6707 Digital Imager Scanner Product Reference Guide Troubleshooting Troubleshooting Table 3-1 Problem The aiming pattern does not appear when pressing the trigger. Scanner emits short low/short medium/short high beep sequence (power-up beep sequence) more than once.
Page 43 Buffering Clear Buffer bar code or upon attempt to transmit an empty Code 39 buffer. Normal when changing USB host type. Normal when Beep on <BEL> is enabled and the digital imager scanner is in RS-232 mode. 3 - 3...
Page 44: Technical Specifications
PDF417 (& Variants) DPM (DS6707-DP only) Description Symbol DS6707-DP: 6.55 in. x 5.08 in. x 2.82 in. (16.6 cm x 12.9 cm x 7.1 cm) (H x L x W) All other models: 6.55 in. x 4.72 in. x 2.82 in. (16.6 cm x 11.9 cm x 7.1 cm)
Page 45 Technical Specifications (Continued) Table 3-2 Item Typical Working Distance: 5 mil Code 39: SR - Standard Range Focus 10 mil I 2 of 5: 13 mil 100% UPC/EAN: 20 mil Code 39: Postnet: 6.6 mil PDF417: 10 mil PDF417: 10 mil QR Code: 10 mil MicroPDF 10 mil Data Matrix: 35 mil Maxicode:...
Page 46 3 - 6 Symbol DS6707 Digital Imager Scanner Product Reference Guide Technical Specifications (Continued) Table 3-2 Item Typical Working Distance: HD - High Density Print Contrast Motion Tolerances Interfaces Supported Imaging Characteristics Image (# of Pixels) Graphics Format Support Image Transfer Speed...
Page 47 Technical Specifications (Continued) Table 3-2 Item User Environment Operating Temperature 32º F to 104º F (0º C to 40º C) Storage Temperature -40º F to 158º F (-40º C to 70º C) Humidity 5% to 95%, non-condensing Drop Specifications Withstands multiple 5 ft. (1.52 m) drops to concrete at operating temperature extremes, and multiple 6 ft.
Page 48: Digital Imager Scanner Signal Descriptions
Jump to Pin 6 Power Power Ground Ground Reserved Jump to Pin 1 Reserved Reserved Reserved Reserved Reserved Reserved Bottom of digital imager scanner Cable interface port Pin 1 apply to the connectors on the Symbol DS6707 digital imager scanner and are...
Page 49: Chapter 4 User Preferences & Miscellaneous Digital Imager Scanner Options
Digital Imager Scanner Options Introduction You can program the digital imager scanner to perform various functions, or activate different features. This chapter describes each user preference feature and provides programming bar codes for selecting these features. The digital imager scanner ships with the settings shown in Default Parameters for all host device and miscellaneous defaults).
Page 50: Scanning Sequence Examples
4 - 2 Symbol DS6707 Digital Imager Scanner Product Reference Guide Scanning Sequence Examples In most cases, scanning one bar code sets the parameter value. For example, to set the beeper tone to high, scan the High Frequency (beeper tone) bar code listed under issues a fast warble beep and the LED turns green, signifying a successful parameter entry.
Page 51 User Preferences & Miscellaneous Digital Imager Scanner Options User Preferences Parameter Defaults (Continued) Table 4-1 Parameter Beep After Good Decode Decoding Illumination DP Illumination Decode Aiming Pattern Fuzzy 1D Processing Decode Mirror Images Miscellaneous Options Transmit Code ID Character Prefix Value...
Page 52: User Preferences
Set Default Parameter You can reset the Symbol DS6707 to two types of defaults: factory defaults or custom defaults. Scan the appropriate bar code below to reset the scanner to its default settings and/or set its current settings as custom defaults.
Page 53: Parameter Scanning
To select a decode beep frequency (tone), scan the Low Frequency, Medium Frequency, or High Frequency bar code. Low Frequency (02h) High Frequency (00h) User Preferences & Miscellaneous Digital Imager Scanner Options Disable Parameter Scanning (00h) Medium Frequency (Optimum Setting) (01h)
Page 54: Beeper Volume
This parameter determines whether or not power remains on after a decode attempt. In reduced power mode, the digital imager scanner enters into a low power consumption mode to preserve battery life after each decode attempt. In continuous power mode, power remains on after each decode attempt.
Page 55: Time Delay To Low Power Mode
NOTE This parameter only applies when Power Mode is set to Reduced Power. This parameter sets the time the digital imager scanner remains active after decoding. The digital imager scanner wakes upon trigger pull or when the host attempts to communicate with the digital imager scanner.
Page 56: Trigger Mode
Decoding range is reduced in this mode. • Auto Aim - This trigger mode turns on the red laser aiming pattern when the digital imager scanner senses motion. A trigger pull activates decode processing. After 2 seconds of inactivity the red laser aiming pattern automatically shuts off.
Page 57: Picklist Mode
Picklist Mode Parameter # F0h 92h Picklist mode enables the digital imager scanner to decode only bar codes that are aligned under the laser crosshair. Select one of the following picklist modes for the digital imager scanner: • Disabled Always - Picklist mode is always disabled.
Page 58: Decode Session Timeout
Use this option in presentation (hands-free) mode to prevent the beeper from continuously beeping when a symbol is left in the digital imager scanner’s field of view. It is programmable in 0.1 second increments from 0.0 to 9.9 seconds. The default interval is 0.6 seconds.
Page 59: Decoding Illumination
Parameter # 38h Select a bar code below to choose whether or not the digital scanner beeps after a good decode (or image capture in Snapshot mode). If you select Do Not Beep After Good Decode, the beeper still operates during parameter menu scanning and to indicate error conditions.
Page 60: Dp Illumination
4 - 12 Symbol DS6707 Digital Imager Scanner Product Reference Guide DP Illumination Parameter # F1h, 3Bh This parameter controls whether the digital imager scanner uses direct or indirect illumination. Options are: • Auto Illumination: Alternates direct and indirect illumination.
Page 61: Decode Aiming Pattern
Disable this only if you experience time delays when decoding 2D bar codes, or in detecting a no decode. *Enable Fuzzy 1D Processing (01h) User Preferences & Miscellaneous Digital Imager Scanner Options 4 - 13 Disable Decode Aiming Pattern Disable Fuzzy 1D Processing (00h)
Page 62: Decode Mirror Images (Data Matrix Only)
4 - 14 Symbol DS6707 Digital Imager Scanner Product Reference Guide Decode Mirror Images (Data Matrix Only) Parameter # F1h 19h Select an option for decoding mirror image Data Matrix bar codes: • Always - decode only Data Matrix bar codes that are mirror images •...
Page 63: Miscellaneous Scanner Parameters
Parameter # 2Dh A Code ID character identifies the code type of a scanned bar code. This is useful when the digital imager scanner is decoding more than one code type. In addition to any single character prefix already selected, the Code ID character is inserted between the prefix and the decoded symbol.
Page 64: Prefix/Suffix Values
4 - 16 Symbol DS6707 Digital Imager Scanner Product Reference Guide Prefix/Suffix Values Key Category Parameter # P = 63h, S1 = 62h, S2 = 64h Decimal Value Parameter # P = 69h, S1 = 68h, S2 = 6Ah You can append a prefix and/or one or two suffixes to scan data for use in data editing. To set a value for a prefix or suffix, scan a four-digit number (i.e., four bar codes from...
Page 65: Scan Data Transmission Format
To set values for the prefix and/or suffix, see Data As Is (00h) <DATA> <SUFFIX 2> (02h) <PREFIX> <DATA > (04h) User Preferences & Miscellaneous Digital Imager Scanner Options 4 - 17 Prefix/Suffix Values on page <DATA> <SUFFIX 1> <SUFFIX 2> 4-16. <DATA> <SUFFIX 1> (01h) (03h)
Page 66: Fn1 Substitution Values
4 - 18 Symbol DS6707 Digital Imager Scanner Product Reference Guide Scan Data Transmission Format (continued) <PREFIX> <DATA> <SUFFIX 2> (06h) FN1 Substitution Values Key Category Parameter # 67h Decimal Value Parameter # 6Dh The Wedge and USB HID Keyboard hosts support a FN1 Substitution feature. Enabling this substitutes any FN1 character (0x1b) in a GS1-128 bar code with a user-defined value.
Page 67: Transmit "No Read" Message
NR when a bar code is not decoded. Disable this to send nothing to the host if a symbol does not decode. Enable No Read (01h) User Preferences & Miscellaneous Digital Imager Scanner Options 4 - 19 Disable No Read (00h)
Page 68 4 - 20 Symbol DS6707 Digital Imager Scanner Product Reference Guide...
Page 69: Chapter 5 Imaging Preferences
Chapter 5 Imaging Preferences Introduction You can program the digital imager scanner to perform various functions, or activate different features. This chapter describes imaging preference features and provides programming bar codes for selecting these features. The digital imager scanner ships with the settings in Appendix A, Standard Default Parameters suit requirements, programming is not necessary.
Page 70: Scanning Sequence Examples
Disable Decode Aiming Pattern bar code under imager scanner issues a fast warble beep and the LED turns green, signifying a successful parameter entry. Other parameters require scanning several bar codes. See these parameter descriptions for this procedure.
Page 71 Imaging Preferences Parameter Defaults (Continued) Table 5-1 Parameter Snapshot Aiming Pattern Image Cropping Crop to Pixel Addresses Image Size (Number of Pixels) Image Brightness (Target White) JPEG Image Options JPEG Target File Size JPEG Quality and Size Value Image Enhancement Image File Format Selection Bits per Pixel (BPP) Signature Capture...
Page 72: Imaging Preferences
By default, when you pull the trigger the digital imager scanner attempts to locate and decode enabled bar codes within its field of view. The digital imager scanner remains in this mode until it decodes a bar code or you release the trigger.
Page 73: Low Light Enhancement
In presentation mode, the scanner searches for a bar code in a smaller region around the aiming pattern’s center cross to speed search time. To use a full field of view, scan Presentation Mode Full Field of View. This allows the scanner to search the larger area of the aiming pattern.
Page 74: Image Capture Autoexposure
Image Capture Autoexposure Parameter # F0h, 68h Select Enable Image Capture Autoexposure to allow the digital imager scanner to control gain settings and exposure (integration) time to best capture an image for the selected operation mode. Select Disable Image Capture Autoexposure to manually adjust the gain and exposure time (see the following pages).
Page 75: Illumination Bank Control
Illumination Bank Control Parameter # F1h, 3Bh This parameter controls the illumination banks on the scan engine. Options are: • Full: Enables the full illumination system (default). • Auto: Switches the illumination system from left to right bank. • Left: Enables the left bank. •...
Page 76: Fixed Exposure
5 - 8 Symbol DS6707 Digital Imager Scanner Product Reference Guide Fixed Exposure Parameter #: F4h F1h 37h Type: Word Range: 5 - 5000 This parameter configures the exposure used in manual mode for both Decode and Snapshot/Video/Video viewfinder modes.
Page 77: Gain/Exposure Priority For Snapshot Mode
However, for most applications, the amount of noise is acceptable. • Scan Low Gain Priority to set a mode in which the digital imager scanner favors longer exposure time rather than higher gain to capture an image. This ensures that the image is less noisy and produces fewer artifacts during post processing activities like image enhancement (sharpening).
Page 78: Snapshot Mode Timeout
This parameter sets the amount of time the digital imager scanner remains in Snapshot Mode. The digital imager scanner exits Snapshot Mode when you pull the trigger, or when the Snapshot Mode Timeout elapses. To set this timeout value, scan the bar code below followed by a bar code from value is 0 which represents 30 seconds;...
Page 79: Image Cropping
Select Enable Image Cropping to crop the image to the pixel addresses set in 5-12. NOTE The digital scanner has a cropping resolution of 4 pixels. Setting the cropping area to less than 3 pixels transfers the entire image. Enable Image Cropping...
Page 80: Crop To Pixel Addresses
5 - 12 Symbol DS6707 Digital Imager Scanner Product Reference Guide Crop to Pixel Addresses Parameter # F4h, F0h, 3Bh (Top) Parameter # F4h, F0h, 3Ch (Left) Parameter # F4h, F0h, 3Dh (Bottom) Parameter # F4h, F0h, 3Eh (Right) If you selected Enable Image Cropping, set the pixel addresses from (0,0) to (1279,1023) to crop to.
Page 81: Image Size (Number Of Pixels)
Image Size (Number of Pixels) Parameter # F0h, 2Eh This option alters image resolution before compression. Multiple pixels are combined to one pixel, resulting in a smaller image containing the original content with reduced resolution. Select one of the following values: Resolution Uncropped Image Size Value...
Page 82: Image Brightness (Target White)
Select an option to optimize JPEG images for either size or for quality. Scan the JPEG Quality Selector bar code to enter a quality value; the digital imager scanner then selects the corresponding image size. Scan the JPEG Size Selector bar code to enter a size value; the digital imager scanner then selects the best image quality.
Page 83: Jpeg Target File Size
JPEG Target File Size Parameter # F4h, F1h, 31h Type: Word Range: 5-600 This parameter defines the target JPEG file size in terms 1 Kilobytes (1024 bytes). The default value is 160 kB which represents 160 Kilobytes. JPEG compress may take 10 to 15 seconds based on the amount of information in the target image. CAUTION Scanning JPEG Quality Selector (default setting) on consistent in quality and compression time.
Page 84: Image Enhancement
5 - 16 Symbol DS6707 Digital Imager Scanner Product Reference Guide Image Enhancement Parameter # F1h, 34h This parameter configures the digital imager scanner's Image Enhance feature. This feature uses a combination of edge sharpening and contrast enhancement to produce an image that is visually pleasing.
Page 85: Image File Format Selector
Image File Format Selector Parameter # F0h, 30h Select an image format appropriate for the system (BMP, TIFF, or JPEG). The digital imager scanner stores captured images in the selected format. BMP File Format (03h) TIFF File Format (04h) Imaging Preferences 5 - 17...
Page 86: Bits Per Pixel
5 - 18 Symbol DS6707 Digital Imager Scanner Product Reference Guide Bits Per Pixel Parameter # F0h, 2Fh Select the number of significant bits per pixel (BPP) to use when capturing an image. Select 1 BPP for a black and white image, 4 BPP to assign 1 of 16 levels of grey to each pixel, or 8 BPP to assign 1 of 256 levels of grey to each pixel.
Page 87: Signature Capture
Signature Capture Parameter # 5Dh A signature capture bar code is a special-purpose symbology which delineates a signature capture area in a document with a machine-readable format. The recognition pattern is variable so it can optionally provide an index to various signatures. The region inside the bar code pattern is considered the signature capture area. Output File Format Decoding a signature capture bar code de-skews the signature image and converts the image to a BMP, JPEG, or TIFF file format.
Page 88: Signature Capture File Format Selector
5 - 20 Symbol DS6707 Digital Imager Scanner Product Reference Guide Signature Capture File Format Selector Parameter # F0h, 39h Select a signature file format appropriate for the system (BMP, TIFF, or JPEG). The digital imager scanner stores captured signatures in the selected format. BMP Signature Format...
Page 89: Signature Capture Bits Per Pixel
NOTE The digital imager scanner ignores these settings for JPEG file formats, which only support 8 BPP. The digital imager scanner ignores 1 BPP for TIFF file formats, which only support 4 BPP and 8 BPP. 1 BPP is coerced to 4 BPP for TIFF file formats.
Page 90: Signature Capture Width
5 - 22 Symbol DS6707 Digital Imager Scanner Product Reference Guide Signature Capture Width Parameter # F4h, F0h, 6Eh The aspect ratio of the Signature Capture Width and Signature Capture Height parameters must match that of the signature capture area. For example, a 4 x 1 inch signature capture area would require a 4 to 1 aspect ratio of width to height.
Page 91: Video View Finder
Video View Finder Parameter # F0h, 44h Select Enable Video View Finder to project the video view finder while in Video Mode, or Disable Video View Finder to turn the video view finder off. Disable Video View Finder (00h) Target Video Frame Size Parameter # F0h, 48h Select the number of 100-byte blocks to transmit per second.
Page 92: Video View Finder Image Size
5 - 24 Symbol DS6707 Digital Imager Scanner Product Reference Guide Video View Finder Image Size Parameter # F0h, 49h Select the number of 100-byte blocks. Values range from 800 to 3000 bytes. Selecting a smaller value transmits more frames per second; selecting a larger value increases video quality.
Page 93: Chapter 6 Ssi Interface
Chapter 6 SSI Interface Introduction This chapter describes how to set up the digital imager scanner with a Simple Serial Interface (SSI) host. When using SSI, program the digital imager scanner via bar code menu or SSI host commands. Throughout the programming bar code menus, default values are indicated with asterisks ( Indicates Default NOTE Most computer monitors allow scanning the bar codes directly on the screen.
Page 94: Connecting Using Simple Serial Interface
Host SSI Host Connection Figure 6-1 Attach the modular connector of the interface cable to the cable interface port on the digital imager scanner (see Installing the Interface Cable on page Connect the other end of the interface cable to the serial port on the host.
Page 95: Simple Serial Interface Default Parameters
Simple Serial Interface Default Parameters Table 6-1 lists the defaults for the SSI host. There are two ways to change the default values: • Scan the appropriate bar codes in this guide. These new values replace the standard default values in memory.
Page 96: Ssi Host Parameters
Parameter # 9Ch Baud rate is the number of bits of data transmitted per second. Set the digital imager scanner's baud rate to match the data rate setting of the host device. Otherwise, data may not reach the host or may reach it in distorted form.
Page 97 SSI Interface 6 - 5 Baud Rate (continued) Baud Rate 19,200 (07h) 38,400 (08h) 57,600 (0Ah) 115,200 (0Bh) 230,400 (0Ch)
Page 98: Parity
6 - 6 Symbol DS6707 Digital Imager Scanner Product Reference Guide Parity Parameter # 9Eh A parity check bit is the most significant bit of each ASCII coded character. Select the parity type according to host device requirements. • Select Odd parity to set the parity bit to a value 0 or 1, based on data, to ensure that the coded character contains an odd number of 1 bits.
Page 99: Check Parity
The digital imager scanner waits up to the programmable Host Serial Response Time-out to receive an ACK or NAK. If the scanner does not get a response in this time, it resends its data up to two times before discarding the data and declaring a transmit error.
Page 100: Host Rts Line State
The SSI Interface is used with host applications which also implement the SSI protocol. However, you can also use the digital imager scanner in a "scan-and-transmit" mode to communicate with any standard serial communication software on a host PC (see Decode Data Packet Format on page the host PC may be asserting hardware handshaking lines which interfere with the SSI protocol.
Page 101: Stop Bit Select
Stop Bit Select Parameter # 9Dh The stop bit(s) at the end of each transmitted character marks the end of transmission of one character and prepares the receiving (host) device for the next character in the serial data stream. Set the number of stop bits (one or two) to match host device requirements.
Page 102: Host Serial Response Time-Out
6 - 10 Symbol DS6707 Digital Imager Scanner Product Reference Guide Host Serial Response Time-out Parameter # 9Bh This parameter specifies how long the decoder waits for an ACK or NAK before resending. Also, if the decoder wants to send, and the host was already granted permission to send, the decoder waits for the designated time-out before declaring an error.
Page 103: Host Character Time-Out
Host Character Time-out Parameter # EFh This parameter determines the maximum time the decoder waits between characters transmitted by the host before discarding the received data and declaring an error. To set the delay period (options are 200, 500, 750, or 990 ms), scan one of the following bar codes. NOTE Other values are available via SSI command.
Page 104: Multipacket Option
6 - 12 Symbol DS6707 Digital Imager Scanner Product Reference Guide Multipacket Option Parameter # F0h, 4Eh This parameter controls ACK/NAK handshaking for multi-packet transmissions. • Multi-Packet Option 1: The host sends an ACK / NAK for each data packet during a multi-packet transmission.
Page 105: Interpacket Delay
Interpacket Delay Parameter # F0h, 4Fh This parameter specifies the interpacket delay when Multipacket Option 3 is selected. To set the delay period (options are 0, 25, 50, 75, or 99 ms), scan one of the following bar codes. NOTE Other values are available via SSI command. Minimum - 0 ms (00h) Medium - 50 ms...
Page 106: Event Reporting
6 - 14 Symbol DS6707 Digital Imager Scanner Product Reference Guide Event Reporting The host can request the digital imager scanner to provide certain information (events) relative to the digital imager scanner’s behavior. Enable or disable the events listed in appropriate bar codes.
Page 107: Boot Up Event
(01h) Parameter Event Parameter # F0h, 03h When enabled, the digital imager scanner generates a message to the host when one of the events specified in Table 6-2 on page 6-14 occurs. When disabled, no notification is sent. Enable Parameter Event...
Page 108 6 - 16 Symbol DS6707 Digital Imager Scanner Product Reference Guide...
Page 109: Chapter 7 Usb Interface
Introduction This chapter describes how to set up the digital imager scanner with a USB host. The digital imager scanner connects directly to a USB host, or a powered USB hub, which powers it. No additional power supply is required.
Page 110: Connecting A Usb Interface
To set up the digital imager scanner: NOTE Interface cables vary depending on configuration. The connectors illustrated in only. The connectors may be different than those illustrated, but the steps to connect the scanner are the same. Connect the modular connector of the USB interface cable to the cable interface port on the digital imager...
Page 111: Usb Parameter Defaults
USB Parameter Defaults Table 7-1 lists the defaults for USB host parameters. To change an option, scan the appropriate bar code(s) provided in the Parameter Descriptions section beginning on NOTE See Appendix A, Standard Default Parameters miscellaneous default parameters. USB Interface Parameter Defaults Table 7-1 Parameter USB Host Parameters...
Page 112: Usb Host Parameters
Symbol DS6707 Digital Imager Scanner Product Reference Guide USB Host Parameters USB Device Type Select the desired USB device type. NOTE When changing USB Device Types, the digital imager scanner automatically resets and issues the standard startup beep sequences. HID Keyboard Emulation IBM Hand-Held USB...
Page 113: Symbol Native Api (Snapi) Status Handshaking
USB Interface 7 - 5 USB Device Type (continued) Symbol Native API (SNAPI) with Imaging Interface Symbol Native API (SNAPI) without Imaging Interface Symbol Native API (SNAPI) Status Handshaking After selecting a SNAPI interface as the USB device type, select whether to enable or disable status handshaking. Enable SNAPI Status Handshaking Disable SNAPI Status Handshaking...
Page 114: Usb Country Keyboard Types (Country Codes)
Scan the bar code corresponding to the keyboard type. This setting applies only to the USB HID Keyboard Emulation device. NOTE When changing USB country keyboard types the digital imager scanner automatically resets and issues the standard startup beep sequences.
Page 115 USB Interface 7 - 7 USB Country Keyboard Types (continued) Spanish Windows Italian Windows Swedish Windows UK English Windows Japanese Windows (ASCII) Portuguese-Brazilian Windows...
Page 116: Usb Keystroke Delay
7 - 8 Symbol DS6707 Digital Imager Scanner Product Reference Guide USB Keystroke Delay This parameter sets the delay, in milliseconds, between emulated keystrokes. Scan a bar code below to increase the delay when hosts require slower data transmission. No Delay...
Page 117: Usb Ignore Unknown Characters
If you select Do Not Send Bar Codes With Unknown Characters, for IBM devices, bar codes containing at least one unknown character are not sent to the host, and the scanner sounds an error beep. For HID Keyboard Emulation devices, the bar code characters up to the unknown character are sent, and the scanner sounds an error beep.
Page 118: Emulate Keypad With Leading Zero
7 - 10 Symbol DS6707 Digital Imager Scanner Product Reference Guide Emulate Keypad with Leading Zero Enable this to send character sequences sent over the numeric keypad as ISO characters which have a leading zero. For example ASCII A transmits as “ALT MAKE” 0 0 6 5 “ALT BREAK”.
Page 119: Function Key Mapping
Function Key Mapping ASCII values under 32 are normally sent as a control-key sequences (see send the keys in bold in place of the standard key mapping. Table entries that do not have a bold entry remain the same whether or not you enable this parameter. Disable Function Key Mapping Simulated Caps Lock Enable this to invert upper and lower case characters on the bar code as if the Caps Lock state is enabled on the...
Page 120: Convert Case
7 - 12 Symbol DS6707 Digital Imager Scanner Product Reference Guide Convert Case Enable this to convert all bar code data to the selected case. No Case Conversion Convert All to Upper Case Convert All to Lower Case...
Page 121: Ascii Character Set For Usb
ASCII Character Set for USB USB Prefix/Suffix Values Table 7-2 Prefix/ Suffix Full ASCII Code 39 Value Encode Char.acter 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023...
Page 122 7 - 14 Symbol DS6707 Digital Imager Scanner Product Reference Guide USB Prefix/Suffix Values (Continued) Table 7-2 Prefix/ Suffix Full ASCII Code 39 Value Encode Char.acter 1025 1026 1027 1028 1029 1030 1031 1032 Space 1033 1034 1035 1036 1037...
Page 123 USB Prefix/Suffix Values (Continued) Table 7-2 Prefix/ Suffix Full ASCII Code 39 Value Encode Char.acter 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080...
Page 124 7 - 16 Symbol DS6707 Digital Imager Scanner Product Reference Guide USB Prefix/Suffix Values (Continued) Table 7-2 Prefix/ Suffix Full ASCII Code 39 Value Encode Char.acter 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094...
Page 125 USB Prefix/Suffix Values (Continued) Table 7-2 Prefix/ Suffix Full ASCII Code 39 Value Encode Char.acter 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 The keystroke in bold transmits only if you enabled Mapping on page 7-11.
Page 126 7 - 18 Symbol DS6707 Digital Imager Scanner Product Reference Guide USB ALT Key Character Set (Continued) Table 7-3 ALT Keys 2072 2073 2074 2075 2076 2077 2078 2079 2080 2081 2082 2083 2084 2085 2086 2087 2088 2089 2090...
Page 127 USB GUI Key Character Set (Continued) Table 7-4 GUI Key 3054 GUI 6 3055 GUI 7 3056 GUI 8 3057 GUI 9 3065 GUI A 3066 GUI B 3067 GUI C 3068 GUI D 3069 GUI E 3070 GUI F 3071 GUI G 3072...
Page 128 7 - 20 Symbol DS6707 Digital Imager Scanner Product Reference Guide USB GUI Key Character Set (Continued) Table 7-4 GUI Key 3088 3089 3090 Note: GUI Shift Keys - The Apple™ iMac keyboard has an apple key on either side of the space bar.
Page 129 USB F Key Character Set (Continued) Table 7-5 F Keys 5022 5023 5024 USB Numeric Keypad Character Set Table 7-6 Numeric Keypad 6042 6043 6044 undefined 6045 6046 6047 6048 6049 6050 6051 6052 6053 6054 6055 6056 6057 6058 Enter 6059 Num Lock...
Page 130 7 - 22 Symbol DS6707 Digital Imager Scanner Product Reference Guide USB Extended Keypad Character Set (Continued) Table 7-7 Extended Keypad 7006 7007 7008 7009 7010 7011 7012 7013 7014 7015 7016 7017 7018 Keystroke Pause Scroll Lock Backspace Print Screen...
Page 131: Chapter 8 Rs-232 Interface
Chapter 8 RS-232 Interface Introduction This chapter describes how to set up the digital imager scanner with an RS-232 host. Use the RS-232 interface to connect the digital imager scanner to point-of-sale devices, host computers, or other devices with an available RS-232 port (e.g., com port).
Page 132: Connecting An Rs-232 Interface
Figure 8-1 NOTE Interface cables vary depending on configuration. The connectors illustrated in only. The connectors may be different than those illustrated, but the steps to connect the scanner are the same. Connect the modular connector of the RS-232 interface cable to the cable interface port on the digital imager...
Page 133: Rs-232 Parameter Defaults
RS-232 Parameter Defaults Table 8-1 lists the defaults for RS-232 host parameters. To change any option, scan the appropriate bar code(s) provided in the RS-232 Host Parameters section beginning on NOTE See Appendix A, Standard Default Parameters miscellaneous default parameters. RS-232 Host Default Table Table 8-1 Parameter...
Page 134: Host Parameters
*In the Nixdorf Mode B, if CTS is low, scanning is disabled. When CTS is high, scanning is enabled. **If you select Nixdorf Mode B without connecting the digital imager scanner to the proper host, it may appear unable to scan. If this happens, scan a different RS-232 host type within 5 seconds of cycling power to the digital imager scanner.
Page 135 RS-232 Host Parameters (continued) Selecting ICL, Fujitsu, Wincor-Nixdorf Mode A, Wincor-Nixdorf Mode B, OPOS/JPOS, Olivetti, or Omron enables the transmission of code ID characters listed in are separate from the Transmit Code ID feature. Do not enable the Transmit Code ID feature for these terminals. Terminal Specific Code ID Characters Table 8-3 Code Type...
Page 136: Host Types
8 - 6 Symbol DS6707 Digital Imager Scanner Product Reference Guide RS-232 Host Types To select an RS-232 host interface, scan one of the following bar codes. Standard RS-232 ICL RS-232 Wincor-Nixdorf RS-232 Mode A Wincor-Nixdorf RS-232 Mode B Olivetti ORS4500 Omron Scanning Enable RS-232 (No Variant) activates the RS-232 driver, but does not change port settings (e.g., parity,...
Page 137: Baud Rate
Baud Rate Baud rate is the number of bits of data transmitted per second. Set the digital imager scanner's baud rate to match the baud rate setting of the host device. Otherwise, data may not reach the host device or may reach it in distorted form.
Page 138 8 - 8 Symbol DS6707 Digital Imager Scanner Product Reference Guide Baud Rate (continued) Baud Rate 9600 Baud Rate 19,200 Baud Rate 38,400 Baud Rate 57,600 Baud Rate 115,200...
Page 139: Parity
Parity A parity check bit is the most significant bit of each ASCII coded character. Select the parity type according to host device requirements. • Select Odd parity to set the parity bit value to 0 or 1, based on data, to ensure that the coded character contains an odd number of 1 bits •...
Page 140: Stop Bit Select
Set the number of stop bits to match host device requirements. 2 Stop Bits Data Bits This parameter allows the digital imager scanner to interface with devices requiring a 7-bit or 8-bit ASCII protocol. 7-Bit 1 Stop Bit 8-Bit...
Page 141: Check Receive Errors
• When the CTS line is de-asserted, the digital imager scanner asserts the RTS line and waits up to Host Serial Response Time-out for the host to assert CTS. When the host asserts CTS, the scanner transmits data. If, after Host Serial Response Time-out (default), the CTS line is not asserted, the digital imager scanner sounds a transmit error, and discards the data.
Page 142 CTS. The digital imager scanner waits up to Host Serial Response Time-out (default) for CTS to be asserted. If CTS is not asserted during this time, the digital imager scanner issues an error indication and discards the data. The digital imager scanner de-asserts RTS when transmission completes.
Page 143: Software Handshaking
The digital imager scanner waits up to the programmable Host Serial Response Time-out to receive an ACK or NAK. If the digital imager scanner does not get a response in this time, it issues an error indication and discards the data. There are no retries when a time-out occurs.
Page 144 XON character. There are two situations for XON/XOFF: • The scanner receives an XOFF before it has data to send. When the digital imager scanner has data to send, it waits up to Host Serial Response Time-out for an XON character before transmission. If it does not receive the XON within this time, the digital imager scanner issues an error indication and discards the data.
Page 145: Host Serial Response Time-Out
Host Serial Response Time-out This parameter specifies how long the digital imager scanner waits for an ACK, NAK, or CTS before determining that a transmission error occurred. This only applies when in one of the ACK/NAK software handshaking modes, or RTS/CTS hardware handshaking mode.
Page 146: Rts Line State
Host: Low RTS Beep on <BEL> If you enable this parameter, the digital imager scanner issues a beep when it detects a <BEL> character on the RS-232 serial line. <BEL> gains a user's attention to an illegal entry or other important event.
Page 147: Intercharacter Delay
RS-232 Interface 8 - 17 Intercharacter Delay This parameter specifies the intercharacter delay inserted between character transmissions. Minimum: 0 msec Low: 25 msec Medium: 50 msec High: 75 msec Maximum: 99 msec...
Page 148: Nixdorf Beep/Led Options
8 - 18 Symbol DS6707 Digital Imager Scanner Product Reference Guide Nixdorf Beep/LED Options If you selected Nixdorf Mode B, this indicates when the digital imager scanner beeps and turns on its LED after a decode. Normal Operation (Beep/LED immediately after decode)
Page 149: Ascii Character Set For Rs-232
ASCII Character Set for RS-232 You can assign the values in Prefix/Suffix Values Table 8-4 Prefix/Suffix Value Code 39 Encode Character 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021...
Page 150 8 - 20 Symbol DS6707 Digital Imager Scanner Product Reference Guide Prefix/Suffix Values (Continued) Table 8-4 Prefix/Suffix Value Code 39 Encode Character 1027 1028 1029 1030 1031 1032 Space 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043...
Page 151 Prefix/Suffix Values (Continued) Table 8-4 Prefix/Suffix Full ASCII Value Code 39 Encode Character 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086...
Page 152 8 - 22 Symbol DS6707 Digital Imager Scanner Product Reference Guide Prefix/Suffix Values (Continued) Table 8-4 Prefix/Suffix Value Code 39 Encode Character 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104...
Page 153 Prefix/Suffix Values (Continued) Table 8-4 Prefix/Suffix Full ASCII Value Code 39 Encode Character 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 7013 RS-232 Interface 8 - 23 ASCII Character Undefined ENTER...
Page 154 8 - 24 Symbol DS6707 Digital Imager Scanner Product Reference Guide...
Page 155: Chapter 9 123Scan
Program digital imager scanners via PC download or by scanning a sheet of bar codes generated by the 123Scan utility. Digital imager scanner programming is saved in a file for electronic distribution. The 123Scan program includes a help file.
Page 156 9 - 2 Symbol DS6707 Digital Imager Scanner Product Reference Guide...
Page 157: Chapter 10 Symbologies
UPC-A check digit, simply scan the Do Not Transmit UPC-A Check Digit bar code under Digit on page 10-14. The digital imager scanner issues a fast warble beep and the LED turns green, signifying a successful parameter entry. Other parameters, such as Set Length(s) for D 2 of 5 require scanning several bar codes. See the individual parameter, such as Set Length(s) for D 2 of 5, for this procedure.
Page 158: Errors While Scanning
10 - 2 Symbol DS6707 Digital Imager Scanner Product Reference Guide Errors While Scanning Unless otherwise specified, to correct an error during a scanning sequence, just re-scan the correct parameter. Symbology Parameter Defaults Table 10-1 lists the defaults for all symbologies parameters. There are two ways to change the default values: •...
Page 159 Parameter Defaults (Continued) Table 10-1 Parameter UPC-E1 Preamble Convert UPC-E to A Convert UPC-E1 to A EAN-8/JAN-8 Extend Bookland ISBN Format UCC Coupon Extended Code ISSN EAN Code 128 Code 128 Set Length(s) for Code 128 GS1-128 (formerly UCC/EAN-128) ISBT 128 ISBT Concatenation Check ISBT Table ISBT Concatenation Redundancy...
Page 160 10 - 4 Symbol DS6707 Digital Imager Scanner Product Reference Guide Parameter Defaults (Continued) Table 10-1 Parameter Code 11 Code 11 Set Lengths for Code 11 Code 11 Check Digit Verification Transmit Code 11 Check Digit(s) Interleaved 2 of 5 (ITF)
Page 161 Parameter Defaults (Continued) Table 10-1 Parameter Matrix 2 of 5 Matrix 2 of 5 Matrix 2 of 5 Lengths Matrix 2 of 5 Redundancy Matrix 2 of 5 Check Digit Transmit Matrix 2 of 5 Check Digit Inverse 1D Postal Codes US Postnet US Planet Transmit US Postal Check Digit...
Page 162 10 - 6 Symbol DS6707 Digital Imager Scanner Product Reference Guide Parameter Defaults (Continued) Table 10-1 Parameter Composite Beep Mode GS1-128 Emulation Mode for UCC/EAN Composite Codes 2-D Symbologies PDF417 MicroPDF417 Code 128 Emulation Data Matrix Data Matrix Inverse Maxicode...
Page 163: Upc/Ean
UPC/EAN Enable/Disable UPC-A Parameter # 01h To enable or disable UPC-A, scan the appropriate bar code below Enable UPC-A (01h) Enable/Disable UPC-E Parameter # 02h To enable or disable UPC-E, scan the appropriate bar code below Enable UPC-E (01h) Symbologies 10 - 7 Disable UPC-A (00h) Disable UPC-E...
Page 164: Enable/Disable Upc-E1
10 - 8 Symbol DS6707 Digital Imager Scanner Product Reference Guide Enable/Disable UPC-E1 Parameter # 0Ch UPC-E1 is disabled by default. To enable or disable UPC-E1, scan the appropriate bar code below. NOTE UPC-E1 is not a UCC (Uniform Code Council) approved symbology.
Page 165: Enable/Disable Ean-13/Jan-13
Enable/Disable EAN-13/JAN-13 Parameter # 03h To enable or disable EAN-13/JAN-13, scan the appropriate bar code below. Enable EAN-13/JAN-13 (01h) Enable/Disable Bookland EAN Parameter # 53h To enable or disable Bookland EAN, scan the appropriate bar code below. Enable Bookland EAN (01h) NOTE If you enable Bookland EAN, select a UPC/EAN Supplementals, Autodiscriminate UPC/EAN Supplementals, or Enable 978/979 Supplemental...
Page 166: Decode Upc/Ean/Jan Supplementals
10 - 10 Symbol DS6707 Digital Imager Scanner Product Reference Guide Decode UPC/EAN/JAN Supplementals Parameter # 10h Supplementals are bar codes appended according to specific format conventions (e.g., UPC A+2, UPC E+2, EAN 13+2). The following options are available: •...
Page 167 Decode UPC/EAN/JAN Supplementals (continued) Decode UPC/EAN/JAN Only With Supplementals (01h) Autodiscriminate UPC/EAN/JAN Supplementals (02h) Enable 978/979 Supplemental Mode (05h) Symbologies 10 - 11 Ignore Supplementals (00h) Enable 378/379 Supplemental Mode (04h) Enable 977 Supplemental Mode (07h)
Page 168 10 - 12 Symbol DS6707 Digital Imager Scanner Product Reference Guide Decode UPC/EAN/JAN Supplementals (continued) 414/419/434/439 Supplemental Mode Enable (06h) Enable Smart Supplemental Mode (03h) Supplemental User-Programmable Type 1 and 2 (0Ah) Smart Supplemental Plus User-Programmable 1 and 2 (0Ch)
Page 169: User-Programmable Supplementals
User-Programmable Supplementals Supplemental 1: Parameter # F1h 43h Supplemental 2: Parameter # F1h 44h If you selected a Supplemental User-Programmable option from 10-10, select User-Programmable Supplemental 1 to set the 3-digit prefix. Then select the 3 digits using the numeric bar codes beginning on prefix.
Page 170: Upc/Ean/Jan Supplemental Redundancy
10 - 14 Symbol DS6707 Digital Imager Scanner Product Reference Guide UPC/EAN/JAN Supplemental Redundancy Parameter # 50h If you selected Autodiscriminate UPC/EAN/JAN Supplementals, this option adjusts the number of times a symbol without supplementals is decoded before transmission. The range is from two to thirty times. Five or above is recommended when decoding a mix of UPC/EAN/JAN symbols with and without supplementals.
Page 171: Transmit Upc-E Check Digit
Transmit UPC-E Check Digit Parameter # 29h The check digit is the last character of the symbol used to verify the integrity of the data. Scan the appropriate bar code below to transmit the bar code data with or without the UPC-E check digit. It is always verified to guarantee the integrity of the data.
Page 172 10 - 16 Symbol DS6707 Digital Imager Scanner Product Reference Guide UPC-A Preamble Parameter # 22h Preamble characters are part of the UPC symbol, and include Country Code and System Character. There are three options for transmitting a UPC-A preamble to the host device: transmit System Character only, transmit System Character and Country Code (“0”...
Page 173 UPC-E Preamble Parameter # 23h Preamble characters are part of the UPC symbol, and include Country Code and System Character. There are three options for transmitting a UPC-E preamble to the host device: transmit System Character only, transmit System Character and Country Code (“0” for USA), and transmit no preamble. Select the appropriate option to match the host system.
Page 174: Upc-E1 Preamble
10 - 18 Symbol DS6707 Digital Imager Scanner Product Reference Guide UPC-E1 Preamble Parameter # 24h Preamble characters are part of the UPC symbol, and include Country Code and System Character. There are three options for transmitting a UPC-E1 preamble to the host device: transmit System Character only, transmit System Character and Country Code (“0”...
Page 175: Convert Upc-E1 To Upc-A
Convert UPC-E to UPC-A Parameter # 25h Enable this to convert UPC-E (zero suppressed) decoded data to UPC-A format before transmission. After conversion, the data follows UPC-A format and is affected by UPC-A programming selections (e.g., Preamble, Check Digit). Disable this to transmit UPC-E decoded data as UPC-E data, without conversion. Convert UPC-E to UPC-A (Enable) (01h) Convert UPC-E1 to UPC-A...
Page 176: Ean-8/Jan-8 Extend
10 - 20 Symbol DS6707 Digital Imager Scanner Product Reference Guide EAN-8/JAN-8 Extend Parameter # 27h Enable this to add five leading zeros to decoded EAN-8 symbols to make them compatible in format to EAN-13 symbols. Disable this to transmit EAN-8 symbols as is.
Page 177: Bookland Isbn Format
Bookland check digit for backward-compatibility. Data starting with 979 is not considered Bookland in this mode. • Bookland ISBN-13 - The scanner reports Bookland data (starting with either 978 or 979) as EAN-13 in 13-digit format to meet the 2007 ISBN-13 protocol. *Bookland ISBN-10...
Page 178: Ucc Coupon Extended Code
10 - 22 Symbol DS6707 Digital Imager Scanner Product Reference Guide UCC Coupon Extended Code Parameter # 55h Enable this to decode UPC-A bar codes starting with digit ‘5’, EAN-13 bar codes starting with digit ‘99’, and UPC-A/GS1-128 Coupon Codes. UPCA, EAN-13, and GS1-128 must be enabled to scan all types of Coupon Codes.
Page 179: Code 128
Range. Then scan 0, 4, 1, and 2 (enter a leading zero for single digit numbers). To correct an error or change the selection, scan • Any Length - Select this option to decode Code 128 symbols containing any number of characters within the digital scanner’s capability. Appendix D, Numeric Bar Cancel on page Appendix D, Numeric Bar Appendix D, Numeric Bar Codes.
Page 180 10 - 24 Symbol DS6707 Digital Imager Scanner Product Reference Guide Set Lengths for Code 128 (continued) Code 128 - One Discrete Length Code 128 - Two Discrete Lengths Code 128 - Length Within Range *Code 128 - Any Length...
Page 181: Enable/Disable Gs1-128 (Formerly Ucc/Ean-128)
Enable/Disable GS1-128 (formerly UCC/EAN-128) Parameter # 0Eh To enable or disable GS1-128, scan the appropriate bar code below. Enable GS1-128 (01h) Enable/Disable ISBT 128 Parameter # 54h ISBT 128 is a variant of Code 128 used in the blood bank industry. Scan a bar code below to enable or disable ISBT 128.
Page 182: Isbt Concatenation
If you select Disable ISBT Concatenation, the digital scanner does not concatenate pairs of ISBT codes it encounters. • If you select Enable ISBT Concatenation, there must be two ISBT codes in order for the digital scanner to decode and perform concatenation. The digital scanner does not decode single ISBT symbols. •...
Page 183: Check Isbt Table
If you set ISBT Concatenation to Autodiscriminate, use this parameter to set the number of times the digital scanner must decode an ISBT symbol before determining that there is no additional symbol. Scan the bar code below, then scan two numeric bar codes in between 2 and 20.
Page 184: Code 39
10 - 28 Symbol DS6707 Digital Imager Scanner Product Reference Guide Code 39 Enable/Disable Code 39 Parameter # 00h To enable or disable Code 39, scan the appropriate bar code below. Enable Code 39 (01h) Enable/Disable Trioptic Code 39 Parameter # 0Dh Trioptic Code 39 is a variant of Code 39 used in the marking of computer tape cartridges.
Page 185: Convert Code 39 To Code 32
Convert Code 39 to Code 32 Parameter # 56h Code 32 is a variant of Code 39 used by the Italian pharmaceutical industry. Scan the appropriate bar code below to enable or disable converting Code 39 to Code 32. NOTE Code 39 must be enabled for this parameter to function. Enable Convert Code 39 to Code 32 (01h) Code 32 Prefix...
Page 186: Set Lengths For Code 39
10 - 30 Symbol DS6707 Digital Imager Scanner Product Reference Guide Set Lengths for Code 39 Parameter # L1 = 12h, L2 = 13h The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) the code contains.
Page 187: Code 39 Check Digit Verification
Set Lengths for Code 39 (continued) Code 39 - Length Within Range Code 39 Check Digit Verification Parameter # 30h Enable this feature to check the integrity of all Code 39 symbols to verify that the data complies with specified check digit algorithm.
Page 188: Transmit Code 39 Check Digit
10 - 32 Symbol DS6707 Digital Imager Scanner Product Reference Guide Transmit Code 39 Check Digit Parameter # 2Bh Scan a bar code below to transmit Code 39 data with or without the check digit. Transmit Code 39 Check Digit (Enable) (01h) NOTE Code 39 Check Digit Verification must be enabled for this parameter to function.
Page 189: Code 39 Buffering (Scan & Store)
Select Do Not Buffer Code 39 to transmit all decoded Code 39 symbols immediately without being stored in the buffer. This feature affects Code 39 only. If selecting Buffer Code 39, Motorola recommends configuring the digital imager scanner to decode Code 39 symbology only.
Page 190 10 - 34 Symbol DS6707 Digital Imager Scanner Product Reference Guide Clear Transmission Buffer To clear the transmission buffer, scan the Clear Buffer bar code below, which contains only a start character, a dash (minus), and a stop character. •...
Page 191 The Code 39 buffer holds 200 characters. If the symbol just read results in an overflow of the transmission buffer: • The digital imager scanner indicates that it rejected the symbol by issuing three long, high beeps. • No transmission occurs. The data in the buffer is not affected.
Page 192: Code 93
10 - 36 Symbol DS6707 Digital Imager Scanner Product Reference Guide Code 93 Enable/Disable Code 93 Parameter # 09h To enable or disable Code 93, scan the appropriate bar code below. Enable Code 93 (01h) Set Lengths for Code 93 Parameter # L1 = 1Ah, L2 = 1Bh The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s)
Page 193 Symbologies 10 - 37 Set Lengths for Code 93 (continued) Code 93 - One Discrete Length Code 93 - Two Discrete Lengths Code 93 - Length Within Range Code 93 - Any Length...
Page 194: Code 11
10 - 38 Symbol DS6707 Digital Imager Scanner Product Reference Guide Code 11 Code 11 Parameter # 0Ah To enable or disable Code 11, scan the appropriate bar code below. Enable Code 11 (01h) Set Lengths for Code 11 Parameter # L1 = 1Ch, L2 = 1Dh The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s)
Page 195 Symbologies 10 - 39 Set Lengths for Code 11 (continued) Code 11 - One Discrete Length Code 11 - Two Discrete Lengths Code 11 - Length Within Range Code 11 - Any Length...
Page 196: Code 11 Check Digit Verification
10 - 40 Symbol DS6707 Digital Imager Scanner Product Reference Guide Code 11 Check Digit Verification Parameter # 34h Enable this to check the integrity of all Code 11 symbols to verify that the data complies with the specified check digit algorithm.
Page 197: Transmit Code 11 Check Digits
Symbologies 10 - 41 Transmit Code 11 Check Digits Parameter # 2Fh This feature selects whether or not to transmit the Code 11 check digit(s). Transmit Code 11 Check Digit(s) (Enable) (01h) Do Not Transmit Code 11 Check Digit(s) (Disable) (00h) NOTE Code 11 Check Digit Verification must be enabled for this parameter to function.
Page 198: Interleaved 2 Of 5 (Itf)
10 - 42 Symbol DS6707 Digital Imager Scanner Product Reference Guide Interleaved 2 of 5 (ITF) Enable/Disable Interleaved 2 of 5 Parameter # 06h To enable or disable Interleaved 2 of 5, scan the appropriate bar code below, and select an Interleaved 2 of 5 length from the following pages.
Page 199 Symbologies 10 - 43 Set Lengths for Interleaved 2 of 5 I 2 of 5 - One Discrete Length I 2 of 5 - Two Discrete Lengths I 2 of 5 - Length Within Range I 2 of 5 - Any Length...
Page 200: I 2 Of 5 Check Digit Verification
10 - 44 Symbol DS6707 Digital Imager Scanner Product Reference Guide I 2 of 5 Check Digit Verification Parameter # 31h Enable this to check the integrity of all I 2 of 5 symbols to verify the data complies with either the specified Uniform Symbology Specification (USS), or the Optical Product Code Council (OPCC) check digit algorithm.
Page 201: Convert I 2 Of 5 To Ean-13
Convert I 2 of 5 to EAN-13 Parameter # 52h Enable this parameter to convert 14-character I 2 of 5 codes to EAN-13, and transmit to the host as EAN-13. To accomplish this, the I 2 of 5 code must be enabled, and the code must have a leading zero and a valid EAN-13 check digit.
Page 202: Discrete 2 Of 5 (Dtf)
10 - 46 Symbol DS6707 Digital Imager Scanner Product Reference Guide Discrete 2 of 5 (DTF) Enable/Disable Discrete 2 of 5 Parameter # 05h To enable or disable Discrete 2 of 5, scan the appropriate bar code below. Enable Discrete 2 of 5...
Page 203 Symbologies 10 - 47 Set Lengths for Discrete 2 of 5 (continued) D 2 of 5 - One Discrete Length D 2 of 5 - Two Discrete Lengths D 2 of 5 - Length Within Range D 2 of 5 - Any Length...
Page 204: Codabar (Nw - 7)
10 - 48 Symbol DS6707 Digital Imager Scanner Product Reference Guide Codabar (NW - 7) Enable/Disable Codabar Parameter # 07h To enable or disable Codabar, scan the appropriate bar code below. Enable Codabar (01h) Set Lengths for Codabar Parameter # L1 = 18h, L2 = 19h The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s)
Page 205 Symbologies 10 - 49 Set Lengths for Codabar (continued) Codabar - One Discrete Length Codabar - Two Discrete Lengths Codabar - Length Within Range Codabar - Any Length...
Page 206: Clsi Editing
10 - 50 Symbol DS6707 Digital Imager Scanner Product Reference Guide CLSI Editing Parameter # 36h Enable this to strip the start and stop characters and insert a space after the first, fifth, and tenth characters of a 14-character Codabar symbol. Enable this feature if the host system requires this data format.
Page 207: Msi
Any Length - Scan this option to decode MSI symbols containing any number of characters within the digital imager scanner capability. NOTE Due to the construction of the MSI symbology, it is possible for a scan line covering only a portion of the code to transmit as a complete scan, yielding less data than is encoded in the bar code.
Page 208: Msi Check Digits
10 - 52 Symbol DS6707 Digital Imager Scanner Product Reference Guide Set Lengths for MSI (continued) MSI - One Discrete Length MSI - Length Within Range MSI Check Digits Parameter # 32h With MSI symbols, one check digit is mandatory and always verified by the reader. The second check digit is optional.
Page 209: Transmit Msi Check Digit(S)
Transmit MSI Check Digit(s) Parameter # 2Eh Scan a bar code below to transmit MSI data with or without the check digit. Transmit MSI Check Digit(s) (Enable) (01h MSI Check Digit Algorithm Parameter # 33h Two algorithms are possible for verifying the second MSI check digit. Select the bar code below corresponding to the algorithm used to encode the check digit.
Page 210: Chinese 2 Of 5
10 - 54 Symbol DS6707 Digital Imager Scanner Product Reference Guide Chinese 2 of 5 Enable/Disable Chinese 2 of 5 Parameter # F0h 98h To enable or disable Chinese 2 of 5, scan the appropriate bar code below. Enable Chinese 2 of 5...
Page 211: Matrix 2 Of 5
Symbologies 10 - 55 Matrix 2 of 5 Enable/Disable Matrix 2 of 5 Parameter # F1h 6Ah To enable or disable Matrix 2 of 5, scan the appropriate bar code below. Enable Matrix 2 of 5 (01h) Disable Matrix 2 of 5 (00h)
Page 212: Set Lengths For Matrix 2 Of 5
10 - 56 Symbol DS6707 Digital Imager Scanner Product Reference Guide Set Lengths for Matrix 2 of 5 Parameter # L1 = F1h 6Bh, L2 = F1h 6Ch The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) the code contains.
Page 213: Matrix 2 Of 5 Redundancy
Matrix 2 of 5 Redundancy Parameter # F1h 6Dh To enable or disable Matrix 2 of 5 redundancy, scan the appropriate bar code below. Enable Matrix 2 of 5 Redundancy (01h) Matrix 2 of 5 Check Digit Parameter # F1h 6Eh The check digit is the last character of the symbol used to verify the integrity of the data.
Page 214: Transmit Matrix 2 Of 5 Check Digit
10 - 58 Symbol DS6707 Digital Imager Scanner Product Reference Guide Transmit Matrix 2 of 5 Check Digit Parameter # F1h 6Fh Scan a bar code below to transmit Matrix 2 of 5 data with or without the check digit.
Page 215: Inverse 1D
- the scanner decodes inverse 1D bar codes only. Inverse Only • - the scanner decodes both regular and inverse 1D bar codes. Inverse Autodetect NOTE The default for this option varies by scanner model as follows: DS6707-SR, DS6707-DC: Regular DS6707-DP, DS6707-HD: Inverse Autodetect Regular (00h)
Page 216: Postal Codes
10 - 60 Symbol DS6707 Digital Imager Scanner Product Reference Guide Postal Codes US Postnet Parameter # 59h To enable or disable US Postnet, scan the appropriate bar code below. Enable US Postnet (01h) US Planet Parameter # 5Ah To enable or disable US Planet, scan the appropriate bar code below.
Page 217: Transmit Us Postal Check Digit
Transmit US Postal Check Digit Parameter # 5Fh Select whether to transmit US Postal data, which includes both US Postnet and US Planet, with or without the check digit. Transmit US Postal Check Digit (01h) UK Postal Parameter # 5Bh To enable or disable UK Postal, scan the appropriate bar code below.
Page 218: Transmit Uk Postal Check Digit
10 - 62 Symbol DS6707 Digital Imager Scanner Product Reference Guide Transmit UK Postal Check Digit Parameter # 60h Select whether to transmit UK Postal data with or without the check digit. Transmit UK Postal Check Digit (01h) Japan Postal Parameter # F0h, 22h To enable or disable Japan Postal, scan the appropriate bar code below.
Page 219: Australian Postal
Australian Postal Parameter # F0h, 23h To enable or disable Australian Postal, scan the appropriate bar code below. Enable Australian Postal (01h) Netherlands KIX Code Parameter # F0h, 46h To enable or disable Netherlands KIX Code, scan the appropriate bar code below. Enable Netherlands KIX Code (01h) Symbologies 10 - 63...
Page 220: Usps 4Cb/One Code/Intelligent Mail
10 - 64 Symbol DS6707 Digital Imager Scanner Product Reference Guide USPS 4CB/One Code/Intelligent Mail Parameter # F1h 50h To enable or disable USPS 4CB/One Code/Intelligent Mail, scan the appropriate bar code below. Enable USPS 4CB/One Code/Intelligent Mail (01h) UPU FICS Postal Parameter # F1h 63h To enable or disable UPU FICS Postal, scan the appropriate bar code below.
Page 221: Gs1 Databar
GS1 DataBar The variants of GS1 DataBar are DataBar-14, DataBar Expanded, and DataBar Limited. The limited and expanded versions have stacked variants. Scan the appropriate bar codes to enable or disable each variant of GS1 DataBar. GS1 DataBar-14 Parameter # F0h 52h. Enable GS1 DataBar-14 (01h) GS1 DataBar Limited...
Page 222: Gs1 Databar Expanded
10 - 66 Symbol DS6707 Digital Imager Scanner Product Reference Guide GS1 DataBar Expanded Parameter # F0h 54h. Enable GS1 DataBar Expanded (01h) Convert GS1 DataBar to UPC/EAN Parameter # F0h, 8Dh This parameter only applies to DataBar-14 and DataBar Limited symbols not decoded as part of a Composite symbol.
Page 223: Composite
Composite Composite CC-C Parameter # F0h 55h Scan a bar code below to enable or disable Composite bar codes of type CC-C. Enable CC-C (01h) Composite CC-A/B Parameter # F0h 56h Scan a bar code below to enable or disable Composite bar codes of type CC-A/B. Enable CC-A/B (01h) Symbologies 10 - 67...
Page 224: Composite Tlc-39
10 - 68 Symbol DS6707 Digital Imager Scanner Product Reference Guide Composite TLC-39 Parameter # F0h 73h Scan a bar code below to enable or disable Composite bar codes of type TLC-39. Enable TLC39 (01h) Disable TLC39 (00h)
Page 225: Upc Composite Mode
If 2D is not present, the UPC bar code does not transmit. • If you select Autodiscriminate UPC Composites, the scanner determines if there is a 2D portion, then transmits the UPC, as well as the 2D portion if present.
Page 226: Composite Beep Mode
10 - 70 Symbol DS6707 Digital Imager Scanner Product Reference Guide Composite Beep Mode Parameter # F0h, 8Eh To select the number of decode beeps when a the scanner decodes a composite bar code, scan the appropriate bar code. Single Beep after both are decoded...
Page 227: Symbologies
2D Symbologies Enable/Disable PDF417 Parameter # 0Fh To enable or disable PDF417, scan the appropriate bar code below. Enable PDF417 (01h) Enable/Disable MicroPDF417 Parameter # E3h To enable or disable MicroPDF417, scan the appropriate bar code below. Enable MicroPDF417 (01h) Symbologies 10 - 71 Disable PDF417 (00h)
Page 228: Code 128 Emulation
10 - 72 Symbol DS6707 Digital Imager Scanner Product Reference Guide Code 128 Emulation Parameter # 7Bh Enable this parameter to transmit data from certain MicroPDF417 symbols as if it was encoded in Code 128 symbols. You must select AIM Code ID Character (01h) on page 4-15...
Page 229: Data Matrix
Symbologies 10 - 73 Data Matrix Parameter # F0h, 24h To enable or disable Data Matrix, scan the appropriate bar code below. Enable Data Matrix (01h) Disable Data Matrix (00h)
Page 230: Data Matrix Inverse
10 - 74 Symbol DS6707 Digital Imager Scanner Product Reference Guide Data Matrix Inverse Parameter # F1h 4Ch This parameter sets the Data Matrix inverse decoder setting. Options are: • - the scanner decodes regular Data Matrix bar codes only.
Page 231: Maxicode
Maxicode Parameter # F0h, 26h To enable or disable Maxicode, scan the appropriate bar code below. Enable Maxicode (01h) QR Code Parameter # F0h,25h To enable or disable QR Code, scan the appropriate bar code below. Enable QR Code (01h) Symbologies 10 - 75 Disable Maxicode (00h)
Page 232: Qr Inverse
10 - 76 Symbol DS6707 Digital Imager Scanner Product Reference Guide QR Inverse Parameter # F1h 4Bh This parameter sets the QR inverse decoder setting. Options are: • - the scanner decodes regular QR bar codes only. Regular Only •...
Page 233: Microqr
MicroQR Parameter # F1h 3Dh To enable or disable MicroQR, scan the appropriate bar code below. Enable MicroQR (01h) Aztec Parameter # F1h 3Eh To enable or disable Aztec, scan the appropriate bar code below. Enable Aztec (01h) Symbologies 10 - 77 Disable MicroQR (00h) Disable Aztec...
Page 234: Aztec Inverse
10 - 78 Symbol DS6707 Digital Imager Scanner Product Reference Guide Aztec Inverse Parameter # F1h 4Dh This parameter sets the Aztec inverse decoder setting. Options are: • - the scanner decodes regular Aztec bar codes only. Regular Only •...
Page 235: Redundancy Level 1
Redundancy Level Parameter # 4Eh The digital imager scanner offers four levels of decode redundancy. Select higher redundancy levels for decreasing levels of bar code quality. As redundancy levels increase, the digital imager scanner’s aggressiveness decreases. Select the redundancy level appropriate for the bar code quality.
Page 236: Redundancy Level 4
10 - 80 Symbol DS6707 Digital Imager Scanner Product Reference Guide Redundancy Level (continued) Redundancy Level 4 The following code types must be successfully read three times before being decoded: Redundancy Level 4 Codes Table 10-5 Code Type Redundancy Level 1...
Page 237: Security Level
Parameter # 4Dh The digital imager scanner offers four levels of decode security for delta bar codes, which include the Code 128 family, UPC/EAN, and Code 93. Select increasing levels of security for decreasing levels of bar code quality. There is an inverse relationship between security and digital imager scanner aggressiveness, so choose only that level of security necessary for any given application.
Page 238: Intercharacter Gap Size
10 - 82 Symbol DS6707 Digital Imager Scanner Product Reference Guide Intercharacter Gap Size Parameter # F0h, 7Dh The Code 39 and Codabar symbologies have an intercharacter gap that is typically quite small. Due to various bar code-printing technologies, this gap can grow larger than the maximum size allowed, preventing the digital imager scanner from decoding the symbol.
Page 239: Macro Pdf Features
Macro PDF Features Macro PDF is a special feature for concatenating multiple PDF symbols into one file. The digital imager scanner can decode symbols that are encoded with this feature, and can store more than 64 kB of decoded data stored in up to 50 MacroPDF symbols.
Page 240 10 - 84 Symbol DS6707 Digital Imager Scanner Product Reference Guide...
Page 241: Chapter 11 Advanced Data Formatting
(see Chapter 9, 123Scan) which allows programming the digital imager scanner with ADF rules. Avoid using ADF formatting with bar codes containing more than 60 characters. To add a prefix or suffix value for such bar codes, use the Add Prefix/Suffix setting. Using ADF with longer bar codes transmits the bar code in segments of length 252 or less (depending on the host selected), and applies the rule to each segment.
Page 242: Using Adf Bar Codes
11 - 2 Symbol DS6707 Digital Imager Scanner Product Reference Guide Using ADF Bar Codes When programming a rule, make sure the rule is logically correct. Plan ahead before scanning. To program each data formatting rule: • Start the Rule. Scan the •...
Page 243: Rule 1: The Code 128 Scanning Rule
Rule 1: The Code 128 Scanning Rule Step Bar Code Begin New Rule Code 128 Send next 5 characters Send <CTRL M> Send next 5 characters Send <CTRL P> Send next 2 characters Send <CTRL D> Save Rule Rule 2: The UPC Scanning Rule Step Bar Code Begin New Rule...
Page 244: Rules Hierarchy (In Bar Codes)
11 - 4 Symbol DS6707 Digital Imager Scanner Product Reference Guide and the cashier keys the price manually. To implement this, first enter an ADF rule that applies to the normal situation, such as: Scan Rule Belongs to Set 1. When scanning a bar code of length 15, send the next 2 characters, send the class key, send the next 8 characters, send the stock key, send the data that remains, send the Enter key.
Page 245: Default Rules
Note that using the standard data editing functions also creates ADF rules. Scan options are entered as ADF rules, and the previous hierarchy also applies to them. For the digital imager scanner, this applies to prefix/suffix programming in the parameter These rules reside in the same “rule list”...
Page 246 11 - 6 Symbol DS6707 Digital Imager Scanner Product Reference Guide ADF Bar Codes (Continued) Table 11-1 Any Message OK Numeric Keypad Rule Belongs To Set Actions Send Data Send Data Up To Character Send Next Character Send All Data That Remains...
Page 247 ADF Bar Codes (Continued) Table 11-1 Parameter Send Function Key Send F1 Key Send F24 Key Send PF1 Key Send PF30 Key Send Right Control Key Send Graphic User Interface (GUI) Characters Send GUI 0 Send GUI 9 Send GUI A Send GUI Z Turn On/Off Rule Sets Alphanumeric Keyboard...
Page 248: Special Commands
11 - 8 Symbol DS6707 Digital Imager Scanner Product Reference Guide Special Commands Pause Duration This parameter, along with the Send Pause parameter on the pause by scanning a two-digit number (i.e., two bar codes) representing a 0.1 second interval in the range of 0.1 to 9.9.
Page 249: Erase
Erase Use these bar codes to erase criteria, actions, or rules. Erase Criteria And Start Again Erase Previously Saved Rule Quit Entering Rules Scan the bar code below to quit entering rules. Advanced Data Formatting Erase Actions And Start Again Erase All Rules Quit Entering Rules 11 - 9...
Page 250: Disable Rule Set
11 - 10 Symbol DS6707 Digital Imager Scanner Product Reference Guide Disable Rule Set Use these bar codes to disable rule sets. Disable Rule Set 1 Disable Rule Set 3 Disable All Rule Sets Disable Rule Set 2 Disable Rule Set 4...
Page 251: Criteria
Advanced Data Formatting 11 - 11 Criteria Code Types Select all code types to be affected by the rule. Scan all selected codes in succession, before selecting other criteria. To select all code types, do not scan any code type. Code 39 Codabar GS1 DataBar-14...
Page 252 11 - 12 Symbol DS6707 Digital Imager Scanner Product Reference Guide Code Types (continued) IATA 2 OF 5 I 2 OF 5 Code 93 UPC-A UPC-E EAN-8 EAN-13 ISSN...
Page 253 Advanced Data Formatting 11 - 13 Code Types (continued) GS1-128 UPC-E1 Bookland EAN Trioptic Code 39 Code 11 Code 32...
Page 254 11 - 14 Symbol DS6707 Digital Imager Scanner Product Reference Guide Code Types (continued) ISBT 128 Coupon Code Chinese 2 of 5 Matrix 2 of 5 US Postnet US Planet UK Postal...
Page 255 Advanced Data Formatting 11 - 15 Code Types (continued) Japan Postal Australian Postal Netherlands KIX Code USPS 4CB/One Code/Intelligent Mail UPU FICS Postal PDF417 MicroPDF...
Page 256 11 - 16 Symbol DS6707 Digital Imager Scanner Product Reference Guide Code Types (continued) Macro PDF Macro MicroPDF MaxiCode Data Matrix QR Code MicroQR TLC 39...
Page 257 Advanced Data Formatting 11 - 17 Code Types (continued) UPC/EAN Composites GS1 DataBar and GS1-128 Composites Aztec Aztec Rune NOTE When selecting composite bar codes, enable AIM IDs if parsing UPC or EAN composite data, or data from an application that uses symbol separators.
Page 258: Code Lengths
11 - 18 Symbol DS6707 Digital Imager Scanner Product Reference Guide Code Lengths Scan these bar codes to define the number of characters the selected code type must contain. Select one length per rule only. Do not select any code length to select code types of any length.
Page 259 Code Lengths (continued) 7 Characters 9 Characters 11 Characters 13 Characters Advanced Data Formatting 11 - 19 8 Characters 10 Characters 12 Characters...
Page 260 11 - 20 Symbol DS6707 Digital Imager Scanner Product Reference Guide Code Lengths (continued) 15 Characters 17 Characters 19 Characters 14 Characters 16 Characters 18 Characters 20 Characters...
Page 261 Code Lengths (continued) 21 Characters 23 Characters 25 Characters 27 Characters Advanced Data Formatting 11 - 21 22 Characters 24 Characters 26 Characters...
Page 262: Message Containing A Specific Data String
11 - 22 Symbol DS6707 Digital Imager Scanner Product Reference Guide Code Lengths (continued) 29 Characters Message Containing A Specific Data String Use this feature to select whether the formatting affects data that begins with a specific character or data string, or contains a specific character or data string.
Page 263 Specific String, Any Location Scan the following bar code. Enter a location by scanning a two-digit number representing the position (use a leading “zero” if necessary) using the Numeric Keypad on page Scan the bar codes representing the desired character or characters (up to a total of 8) using the Keyboard on page 11-91.
Page 264 11 - 24 Symbol DS6707 Digital Imager Scanner Product Reference Guide Numeric Keypad Do not confuse bar codes on this page with those on the alphanumeric keyboard.
Page 265 Advanced Data Formatting 11 - 25 Numeric Keypad (continued) Cancel...
Page 266 11 - 26 Symbol DS6707 Digital Imager Scanner Product Reference Guide Rule Belongs To Set Select the set to which a rule belongs. There are four possible rule sets. See more information about rule sets. Rule Belongs To Set 1...
Page 267: Actions
Actions Select how to format the data for transmission. Send Data Send all data that follows, send all data up to a specific character selected from the page 11-91, or send the next X characters. Note that only bar codes for Send Next 1 to 20 appear here, and can be scanned multiple times to send values greater then 20.
Page 268 11 - 28 Symbol DS6707 Digital Imager Scanner Product Reference Guide Send Data (continued) Send Next 5 Characters Send Next 7 Characters Send Next 9 Characters Send Next 11 Characters Send Next 6 Characters Send Next 8 Characters Send Next 10 Characters...
Page 269 Send Data (continued) Send Next 13 Characters Send Next 15 Characters Send Next 17 Characters Advanced Data Formatting Send Next 12 Characters Send Next 14 Characters Send Next 16 Characters Send Next 18 Characters 11 - 29...
Page 270: Setup Field(S)
11 - 30 Symbol DS6707 Digital Imager Scanner Product Reference Guide Send Data (continued) Send Next 19 Characters Setup Field(s) Setup Field(s) Definitions Table 11-2 Parameter Move Cursor Move Cursor To a Character Move Cursor to Start of Data Move Cursor Past a Character...
Page 271 Setup Field(s) Definitions (Continued) Table 11-2 Parameter Move Cursor to Last This action replaces all occurrences of a selected string with another Occurrence of String and user-defined string, and moves the cursor to the beginning of the last Replace All occurrence.
Page 272 11 - 32 Symbol DS6707 Digital Imager Scanner Product Reference Guide Move Cursor (continued) Move Cursor Past Character Move Cursor to Specific String and Replace Skip to End Send Pause Scan the bar code below to insert a pause in the transmission of data.
Page 273 Skip Ahead Use the following bar codes to skip ahead characters. Skip Ahead 1 Character Skip Ahead 3 Characters Skip Ahead 5 Characters Skip Ahead 7 Characters Advanced Data Formatting Skip Ahead 2 Characters Skip Ahead 4 Characters Skip Ahead 6 Characters 11 - 33...
Page 274 11 - 34 Symbol DS6707 Digital Imager Scanner Product Reference Guide Skip Ahead (continued) Skip Ahead 8 Characters Skip Ahead 9 Characters Skip Ahead 10 Characters Skip Back Use the following bar codes to skip back characters. Skip Back 1 Character...
Page 275 Skip Back (continued) Skip Back 5 Characters Skip Back 7 Characters Skip Back 9 Characters Advanced Data Formatting Skip Back 4 Characters Skip Back 6 Characters Skip Back 8 Characters Skip Back 10 Characters 11 - 35...
Page 276 11 - 36 Symbol DS6707 Digital Imager Scanner Product Reference Guide Send Preset Value Use these bar codes to send preset values. Set these values using the Scan Prefix and Scan Suffix bar codes on page 4-16. Send Prefix Send Suffix...
Page 277: Modify Data
Advanced Data Formatting 11 - 37 Modify Data Modify data as described below. The following actions work for all send commands that follow it within a rule. Programming pad zeros to length 6, send next 3 characters, stop padding, send next 5 characters, adds three zeros to the first send, and the next send is unaffected by the padding.
Page 278: Pad Data With Spaces
11 - 38 Symbol DS6707 Digital Imager Scanner Product Reference Guide Pad Data with Spaces To pad data to the left, scan the bar code containing the desired number of spaces. Send commands activate this parameter. Pad Spaces To Length 1...
Page 279 Advanced Data Formatting 11 - 39 Pad Data with Spaces (continued) Pad Spaces To Length 8 Pad Spaces To Length 9 Pad Spaces To Length 10 Pad Spaces To Length 11 Pad Spaces To Length 12 Pad Spaces To Length 13 Pad Spaces To Length 14...
Page 280 11 - 40 Symbol DS6707 Digital Imager Scanner Product Reference Guide Pad Data with Spaces (continued) Pad Spaces To Length 15 Pad Spaces To Length 17 Pad Spaces To Length 19 Pad Spaces To Length 21 Pad Spaces To Length 16...
Page 281 Pad Data with Spaces (continued) Pad Spaces To Length 23 Pad Spaces To Length 25 Pad Spaces To Length 27 Advanced Data Formatting Pad Spaces To Length 22 Pad Spaces To Length 24 Pad Spaces To Length 26 Pad Spaces To Length 28 11 - 41...
Page 282: Pad Data With Zeros
11 - 42 Symbol DS6707 Digital Imager Scanner Product Reference Guide Pad Data with Spaces (continued) Pad Spaces To Length 29 Stop Pad Spaces Pad Data with Zeros To pad data to the left, scan the bar code containing the desired number of zeros. Send commands activate this parameter.
Page 283 Pad Data with Zeros (continued) Pad Zeros To Length 5 Pad Zeros To Length 7 Pad Zeros To Length 9 Advanced Data Formatting 11 - 43 Pad Zeros To Length 4 Pad Zeros To Length 6 Pad Zeros To Length 8 Pad Zeros To Length 10...
Page 284 11 - 44 Symbol DS6707 Digital Imager Scanner Product Reference Guide Pad Data with Zeros (continued) Pad Zeros To Length 11 Pad Zeros To Length 13 Pad Zeros To Length 15 Pad Zeros To Length 17 Pad Zeros To Length 12...
Page 285 Pad Data with Zeros (continued) Pad Zeros To Length 19 Pad Zeros To Length 21 Pad Zeros To Length 23 Advanced Data Formatting 11 - 45 Pad Zeros To Length 18 Pad Zeros To Length 20 Pad Zeros To Length 22 Pad Zeros To Length 24...
Page 286 11 - 46 Symbol DS6707 Digital Imager Scanner Product Reference Guide Pad Data with Zeros (continued) Pad Zeros To Length 25 Pad Zeros To Length 27 Pad Zeros To Length 29 Stop Pad Zeros Pad Zeros To Length 26 Pad Zeros To Length 28...
Page 287: Beeps
Beeps Select a beep sequence for each ADF rule. Beep Once Beep Three Times Send Keystroke (Control Characters and Keyboard Characters) Control Characters Scan a Send bar code for the keystroke to send. Send Control 2 Send Control B Advanced Data Formatting 11 - 47 Beep Twice Send Control A...
Page 288 11 - 48 Symbol DS6707 Digital Imager Scanner Product Reference Guide Control Characters (continued) Send Control D Send Control F Send Control H Send Control C Send Control E Send Control G Send Control I...
Page 289 Control Characters (continued) Send Control J Send Control L Send Control N Send Control P Advanced Data Formatting 11 - 49 Send Control K Send Control M Send Control O...
Page 290 11 - 50 Symbol DS6707 Digital Imager Scanner Product Reference Guide Control Characters (continued) Send Control R Send Control T Send Control V Send Control Q Send Control S Send Control U Send Control W...
Page 291 Control Characters (continued) Send Control X Send Control Z Send Control \ Advanced Data Formatting 11 - 51 Send Control Y Send Control [ Send Control ]...
Page 292 11 - 52 Symbol DS6707 Digital Imager Scanner Product Reference Guide Control Characters (continued) Send Control 6 Send Control - Keyboard Characters Scan a Send bar code for the keyboard characters to send. Send Space Send ! Send “ Send #...
Page 293 Advanced Data Formatting 11 - 53 Keyboard Characters (continued) Send $ Send % Send & Send ‘ Send ( Send ) Send *...
Page 294 11 - 54 Symbol DS6707 Digital Imager Scanner Product Reference Guide Keyboard Characters (continued) Send , Send . Send 0 Send + Send - Send / Send 1...
Page 295 Keyboard Characters (continued) Send 2 Send 4 Send 6 Send 8 Advanced Data Formatting 11 - 55 Send 3 Send 5 Send 7...
Page 296 11 - 56 Symbol DS6707 Digital Imager Scanner Product Reference Guide Keyboard Characters (continued) Send : Send < Send > Send 9 Send ; Send = Send ?
Page 297 Keyboard Characters (continued) Send @ Send B Send D Send F Advanced Data Formatting 11 - 57 Send A Send C Send E...
Page 298 11 - 58 Symbol DS6707 Digital Imager Scanner Product Reference Guide Keyboard Characters (continued) Send H Send J Send L Send G Send I Send K Send M...
Page 299 Keyboard Characters (continued) Send N Send P Send R Send T Advanced Data Formatting 11 - 59 Send O Send Q Send S...
Page 300 11 - 60 Symbol DS6707 Digital Imager Scanner Product Reference Guide Keyboard Characters (continued) Send V Send X Send Z Send U Send W Send Y Send [...
Page 301 Keyboard Characters (continued) Send \ Send ^ Send ` Send b Advanced Data Formatting 11 - 61 Send ] Send _ Send a...
Page 302 11 - 62 Symbol DS6707 Digital Imager Scanner Product Reference Guide Keyboard Characters (continued) Send d Send f Send h Send c Send e Send g Send i...
Page 303 Keyboard Characters (continued) Send j Send l Send n Send p Advanced Data Formatting 11 - 63 Send k Send m Send o...
Page 304 11 - 64 Symbol DS6707 Digital Imager Scanner Product Reference Guide Keyboard Characters (continued) Send q Send r Send s Send t Send u Send v Send w...
Page 305 Keyboard Characters (continued) Send x Send z Send | Send ~ Advanced Data Formatting 11 - 65 Send y Send { Send }...
Page 306 11 - 66 Symbol DS6707 Digital Imager Scanner Product Reference Guide Send ALT Characters Send Alt 2 Send Alt B Send Alt D Send Alt F Send Alt A Send Alt C Send Alt E...
Page 307 Send ALT Characters (continued) Send Alt H Send Alt J Send Alt L Advanced Data Formatting 11 - 67 Send Alt G Send Alt I Send Alt K Send Alt M...
Page 308 11 - 68 Symbol DS6707 Digital Imager Scanner Product Reference Guide Send ALT Characters (continued) Send Alt N Send Alt P Send Alt R Send Alt T Send Alt O Send Alt Q Send Alt S...
Page 309 Send ALT Characters (continued) Send Alt V Send Alt X Send Alt Z Advanced Data Formatting 11 - 69 Send Alt U Send Alt W Send Alt Y Send Alt [...
Page 310 11 - 70 Symbol DS6707 Digital Imager Scanner Product Reference Guide Send ALT Characters (continued) Send Alt \ Send Alt ]...
Page 311 Send Keypad Characters Send Keypad * Send Keypad - Send Keypad / Send Keypad 1 Advanced Data Formatting 11 - 71 Send Keypad + Send Keypad . Send Keypad 0...
Page 312 11 - 72 Symbol DS6707 Digital Imager Scanner Product Reference Guide Send Keypad Characters (continued) Send Keypad 3 Send Keypad 5 Send Keypad 7 Send Keypad 2 Send Keypad 4 Send Keypad 6 Send Keypad 8...
Page 313 Advanced Data Formatting 11 - 73 Send Keypad Characters (continued) Send Keypad 9 Send Keypad Enter Send Keypad Numlock Send Break Key Send Delete Key Send Page Up Key Send End Key...
Page 314 11 - 74 Symbol DS6707 Digital Imager Scanner Product Reference Guide Send Keypad Characters (continued) Send Page Down Key Send Pause Key Send Scroll Lock Key Send Backspace Key Send Tab Key Send Print Screen Key Send Insert Key...
Page 315 Advanced Data Formatting 11 - 75 Send Keypad Characters (continued) Send Home Key Send Enter Key Send Escape Key Send Up Arrow Key Send Down Arrow Key Send Left Arrow Key Send Right Arrow Key...
Page 316 11 - 76 Symbol DS6707 Digital Imager Scanner Product Reference Guide Send Function Key Send F1 Key Send F3 Key Send F5 Key Send F7 Key Send F2 Key Send F4 Key Send F6 Key...
Page 317 Advanced Data Formatting 11 - 77 Send Function Key (continued) Send F8 Key Send F9 Key Send F10 Key Send F11 Key Send F12 Key Send F13 Key Send F14 Key...
Page 318 11 - 78 Symbol DS6707 Digital Imager Scanner Product Reference Guide Send Function Key (continued) Send F15 Key Send F17 Key Send F19 Key Send F21 Key Send F16 Key Send F18 Key Send F20 Key...
Page 319 Send Function Key (continued) Send F23 Key Send PF1 Key Send PF3 Key Advanced Data Formatting 11 - 79 Send F22 Key Send F24 Key Send PF2 Key Send PF4 Key...
Page 320 11 - 80 Symbol DS6707 Digital Imager Scanner Product Reference Guide Send Function Key (continued) Send PF5 Key Send PF7 Key Send PF9 Key Send PF11 Key Send PF6 Key Send PF8 Key Send PF10 Key...
Page 321 Send Function Key (continued) Send PF13 Key Send PF15 Key Send PF17 Key Advanced Data Formatting 11 - 81 Send PF12 Key Send PF14 Key Send PF16 Key Send PF18 Key...
Page 322 11 - 82 Symbol DS6707 Digital Imager Scanner Product Reference Guide Send Function Key (continued) Send PF19 Key Send PF21 Key Send PF23 Key Send PF25 Key Send PF20 Key Send PF22 Key Send PF24 Key...
Page 323: Send Right Control Key
Send Function Key (continued) Send PF27 Key Send PF29 Key Send Right Control Key The “Send Right Control Key” action will send a tap (press and release) of the Right Control Key. Advanced Data Formatting Send PF26 Key Send PF28 Key Send PF30 Key Send Right Control Key 11 - 83...
Page 324: Send Graphic User Interface (Gui) Characters
11 - 84 Symbol DS6707 Digital Imager Scanner Product Reference Guide Send Graphic User Interface (GUI) Characters The Send Graphic User Interface Character actions tap the specified key while holding the System Dependent Graphic User Interface (GUI) key. The definition of the Graphic User Interface key depends on the attached system.
Page 325 Send Graphic User Interface (GUI) Characters (continued) Send GUI 6 Send GUI 8 Send GUI A Send GUI C Advanced Data Formatting 11 - 85 Send GUI 7 Send GUI 9 Send GUI B...
Page 326 11 - 86 Symbol DS6707 Digital Imager Scanner Product Reference Guide Send Graphic User Interface (GUI) Characters (continued) Send GUI D Send GUI E Send GUI F Send GUI G Send GUI H Send GUI I Send GUI J...
Page 327 Send Graphic User Interface (GUI) Characters (continued) Send GUI K Send GUI M Send GUI O Send GUI Q Advanced Data Formatting 11 - 87 Send GUI L Send GUI N Send GUI P...
Page 328 11 - 88 Symbol DS6707 Digital Imager Scanner Product Reference Guide Send Graphic User Interface (GUI) Characters (continued) Send GUI S Send GUI U Send GUI W Send GUI R Send GUI T Send GUI V Send GUI X...
Page 329: Turn On/Off Rule Sets
Send Graphic User Interface (GUI) Characters (continued) Send GUI Y Turn On/Off Rule Sets Use these bar codes to turn rule sets on and off. Turn On Rule Set 1 Turn On Rule Set 3 Advanced Data Formatting 11 - 89 Send GUI Z Turn On Rule Set 2 Turn On Rule Set 4...
Page 330 11 - 90 Symbol DS6707 Digital Imager Scanner Product Reference Guide Turn On/Off Rule Sets (continued) Use these bar codes to turn rule sets on and off. Turn Off Rule Set 1 Turn Off Rule Set 3 Turn Off Rule Set 2...
Page 331: Alphanumeric Keyboard
Advanced Data Formatting 11 - 91 Alphanumeric Keyboard Space (Single Close Quote) (Dash)
Page 332 11 - 92 Symbol DS6707 Digital Imager Scanner Product Reference Guide Alphanumeric Keyboard (continued) (Comma) & “ ‘...
Page 333 Alphanumeric Keyboard (continued) Advanced Data Formatting 11 - 93 < >...
Page 334 11 - 94 Symbol DS6707 Digital Imager Scanner Product Reference Guide Alphanumeric Keyboard (continued) (Underscore) (Single Open Quote)
Page 335 Alphanumeric Keyboard (continued) NOTE Do not confuse the numeric bar codes below with those on the numeric keypad. Advanced Data Formatting 11 - 95...
Page 336 11 - 96 Symbol DS6707 Digital Imager Scanner Product Reference Guide Alphanumeric Keyboard (continued)
Page 337 Alphanumeric Keyboard (continued) Advanced Data Formatting 11 - 97...
Page 338 11 - 98 Symbol DS6707 Digital Imager Scanner Product Reference Guide Alphanumeric Keyboard (continued)
Page 339 Alphanumeric Keyboard (continued) Advanced Data Formatting 11 - 99...
Page 340 11 - 100 Symbol DS6707 Digital Imager Scanner Product Reference Guide Alphanumeric Keyboard (continued) Cancel End of Message...
Page 341 Alphanumeric Keyboard (continued) Advanced Data Formatting 11 - 101...
Page 342 11 - 102 Symbol DS6707 Digital Imager Scanner Product Reference Guide Alphanumeric Keyboard (continued)
Page 343 Alphanumeric Keyboard (continued) Advanced Data Formatting 11 - 103...
Page 344 11 - 104 Symbol DS6707 Digital Imager Scanner Product Reference Guide Alphanumeric Keyboard (continued)
Page 345: Appendix A Standard Default Parameters
Appendix A Standard Default Parameters Standard Default Parameters Table Table A-1 Parameter User Preferences Set Default Parameter Parameter Scanning Beeper Tone Beeper Volume Power Mode Time Delay to Low Power Mode Trigger Mode Picklist Mode Decode Session Timeout Timeout Between Decodes, Same Symbol Beep After Good Decode Decoding Illumination DP Illumination...
Page 346 A - 2 Symbol DS6707 Digital Imager Scanner Product Reference Guide Standard Default Parameters Table (Continued) Table A-1 Parameter Miscellaneous Scanner Options Transmit Code ID Character Prefix Value Suffix 1 Value Suffix 2 Value Scan Data Transmission Format FN1 Substitution Values Transmit “No Read”...
Page 347 Standard Default Parameters Table (Continued) Table A-1 Parameter JPEG Quality and Size Value Image Enhancement Image File Format Selection Bits per Pixel (BPP) Signature Capture Signature Capture Image File Format Selection Signature Capture Bits per Pixel (BPP) Signature Capture Width Signature Capture Height Signature Capture JPEG Quality Video View Finder...
Page 348 A - 4 Symbol DS6707 Digital Imager Scanner Product Reference Guide Standard Default Parameters Table (Continued) Table A-1 Parameter Parameter Event USB Host Parameters USB Device Type Symbol Native API (SNAPI) Status Handshaking USB Country Keyboard Types (Country Codes) USB Keystroke Delay...
Page 349 Standard Default Parameters Table (Continued) Table A-1 Parameter Nixdorf Beep/LED Options Ignore Unknown Characters 123Scan Configuration Tool 123Scan Configuration UPC/EAN UPC-A UPC-E UPC-E1 EAN-8/JAN 8 EAN-13/JAN 13 Bookland EAN Decode UPC/EAN/JAN Supplementals (2 and 5 digits) User-Programmable Supplementals Supplemental 1: Supplemental 2: UPC/EAN/JAN Supplemental Redundancy Transmit UPC-A Check Digit...
Page 350 A - 6 Symbol DS6707 Digital Imager Scanner Product Reference Guide Standard Default Parameters Table (Continued) Table A-1 Parameter Code 128 Code 128 Set Length(s) for Code 128 GS1-128 (formerly UCC/EAN-128) ISBT 128 ISBT Concatenation Check ISBT Table ISBT Concatenation Redundancy...
Page 351 Standard Default Parameters Table (Continued) Table A-1 Parameter Interleaved 2 of 5 (ITF) Interleaved 2 of 5 (ITF) Set Lengths for I 2 of 5 I 2 of 5 Check Digit Verification Transmit I 2 of 5 Check Digit Convert I 2 of 5 to EAN 13 Discrete 2 of 5 (DTF) Discrete 2 of 5 Set Length(s) for D 2 of 5...
Page 352 A - 8 Symbol DS6707 Digital Imager Scanner Product Reference Guide Standard Default Parameters Table (Continued) Table A-1 Parameter Transmit Matrix 2 of 5 Check Digit Inverse 1D Decoder Postal Codes US Postnet US Planet Transmit US Postal Check Digit...
Page 353 Standard Default Parameters Table (Continued) Table A-1 Parameter 2D Symbologies PDF417 MicroPDF417 Code 128 Emulation Data Matrix Data Matrix Inverse Maxicode QR Code QR Inverse MicroQR Aztec Aztec Inverse Symbology-Specific Security Levels Redundancy Level Security Level Intercharacter Gap Size Report Version Macro PDF Flush Macro PDF Buffer Abort Macro PDF Entry...
Page 354 A - 10 Symbol DS6707 Digital Imager Scanner Product Reference Guide...
Page 355: Appendix B Programming Reference
Appendix B Programming Reference Symbol Code Identifiers Symbol Code Characters Table B-1 Code Character Code Type UPC-A, UPC-E, UPC-E1, EAN-8, EAN-13 Code 39, Code 32 Codabar Code 128, ISBT 128, ISBT 128 Concatenated Code 93 Interleaved 2 of 5 Discrete 2 of 5, or Discrete 2 of 5 IATA Code 11 GS1-128 Bookland EAN...
Page 356 B - 2 Symbol DS6707 Digital Imager Scanner Product Reference Guide Symbol Code Characters (Continued) Table B-1 Code Character Code Type ISSN EAN, PDF417, Macro PDF417, Micro PDF417 Aztec, Aztec Rune Data Matrix QR Code, MicroQR Maxicode US Postnet US Planet...
Page 357: Aim Code Identifiers
AIM Code Identifiers Each AIM Code Identifier contains the three-character string ]cm where: = Flag Character (ASCII 93) c = Code Character (see m = Modifier Character (see Aim Code Characters Table B-2 Code Character Code 39, Code 39 Full ASCII, Code 32 Code 128, ISBT 128, ISBT 128 Concatenated, GS1-128, Coupon (Code 128 portion) Data Matrix...
Page 358 B - 4 Symbol DS6707 Digital Imager Scanner Product Reference Guide The modifier character is the sum of the applicable option values based on Modifier Characters Table B-3 Code Type Option Value Code 39 Example: A Full ASCII bar code with check character W, A+I+MI+DW, is transmitted as ]A7AIMID where 7 = (3+4).
Page 359 Modifier Characters (Continued) Table B-3 Code Type Option Value D 2 of 5 Example: A D 2 of 5 bar code 4123, is transmitted as ]S04123 UPC/EAN Example: A UPC-A bar code 012345678905 is transmitted as ]E00012345678905 Bookland EAN Example: A Bookland EAN bar code 123456789X is transmitted as ]X0123456789X ISSN EAN Example: An ISSN EAN bar code 123456789X is transmitted as ]X0123456789X Code 11...
Page 360 B - 6 Symbol DS6707 Digital Imager Scanner Product Reference Guide Modifier Characters (Continued) Table B-3 Code Type Option Value PDF417, Micro PDF417 Example: A PDF417 bar code ABCD, with no transmission protocol enabled, is transmitted as ]L2ABCD. Data Matrix...
Page 361 Modifier Characters (Continued) Table B-3 Code Type Option Value QR Code Aztec Option Model 1 symbol. Model 2 / MicroQR symbol, ECI protocol not implemented. Model 2 symbol, ECI protocol implemented. Model 2 symbol, ECI protocol not implemented, FNC1 implied in first position.
Page 362 B - 8 Symbol DS6707 Digital Imager Scanner Product Reference Guide...
Page 363: Appendix C Sample Bar Codes
Appendix C Sample Bar Codes Code 39 123ABC UPC/EAN UPC-A, 100% 12345 67890...
Page 364: Ean-13, 100%
C - 2 Symbol DS6707 Digital Imager Scanner Product Reference Guide EAN-13, 100% 3 4 5 67 8 9 0 1 2 3 4 0 Code 128 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4...
Page 365: Gs1 Databar-14
Sample Bar Codes C - 3 GS1 DataBar-14 NOTE GS1 DataBar-14 must be enabled to read the bar code below (see GS1 DataBar-14 on page 10-65). 7612341562341 PDF417 Data Matrix...
Page 366: Maxicode
C - 4 Symbol DS6707 Digital Imager Scanner Product Reference Guide Maxicode QR Code US Postnet...
Page 367: Uk Postal
Sample Bar Codes C - 5 UK Postal...
Page 368 C - 6 Symbol DS6707 Digital Imager Scanner Product Reference Guide...
Page 369: Appendix D: Numeric Bar Codes
Appendix D Numeric Bar Codes Numeric Bar Codes For parameters requiring specific numeric values, scan the appropriately numbered bar code(s).
Page 370: Cancel
D - 2 Symbol DS6707 Digital Imager Scanner Product Reference Guide Numeric Bar Codes (continued) Cancel To correct an error or change a selection, scan the bar code below. Cancel...
Page 371: Appendix E Ascii Character Sets
Appendix E ASCII Character Sets ASCII Value Table Table E-1 ASCII Value 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 The keystroke in bold transmits only if Function Key Mapping is enabled. Otherwise, the unbold keystroke transmits.
Page 372 E - 2 Symbol DS6707 Digital Imager Scanner Product Reference Guide ASCII Value Table (Continued) Table E-1 ASCII Value 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036...
Page 373 ASCII Value Table (Continued) Table E-1 Full ASCII Code 39 ASCII Value 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 The keystroke in bold transmits only if Function Key Mapping is enabled.
Page 374 E - 4 Symbol DS6707 Digital Imager Scanner Product Reference Guide ASCII Value Table (Continued) Table E-1 ASCII Value 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092...
Page 375 ASCII Value Table (Continued) Table E-1 Full ASCII Code 39 ASCII Value 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 The keystroke in bold transmits only if Function Key Mapping is enabled. Otherwise, the unbold keystroke transmits.
Page 376 E - 6 Symbol DS6707 Digital Imager Scanner Product Reference Guide ALT Key Standard Default Tables Table E-2 ALT Keys 2064 2065 2066 2067 2068 2069 2070 2071 2072 2073 2074 2075 2076 2077 2078 2079 2080 2081 2082 2083...
Page 377 USB GUI Key Character Set Table E-3 GUI Key 3000 3048 3049 3050 3051 3052 3053 3054 3055 3056 3057 3065 3066 3067 3068 3069 3070 3071 3072 3073 3074 3075 3076 3077 3078 3079 Note: GUI Shift Keys - The Apple™ iMac keyboard has an apple key on either side of the space bar.
Page 378 E - 8 Symbol DS6707 Digital Imager Scanner Product Reference Guide USB GUI Key Character Set (Continued) Table E-3 GUI Key 3080 3081 3082 3083 3084 3085 3086 3087 3088 3089 3090 Note: GUI Shift Keys - The Apple™ iMac keyboard has an apple key on either side of the space bar.
Page 379 PF Key Standard Default Table Table E-4 PF Keys 4001 PF 1 4002 PF 2 4003 PF 3 4004 PF 4 4005 PF 5 4006 PF 6 4007 PF 7 4008 PF 8 4009 PF 9 4010 PF 10 4011 PF 11 4012 PF 12...
Page 380 E - 10 Symbol DS6707 Digital Imager Scanner Product Reference Guide F key Standard Default Table Table E-5 F Keys 5001 5002 5003 5004 5005 5006 5007 5008 5009 5010 5011 5012 5013 5014 5015 5016 5017 5018 5019 5020...
Page 381 Numeric Key Standard Default Table Table E-6 Numeric Keypad 6042 6043 6044 Undefined 6045 6046 6047 6048 6049 6050 6051 6052 6053 6054 6055 6056 6057 6058 Enter 6059 Num Lock Keystroke ASCII Character Sets E - 11...
Page 382 E - 12 Symbol DS6707 Digital Imager Scanner Product Reference Guide Extended Keypad Standard Default Table Table E-7 Extended Keypad 7001 7002 7003 7004 7005 7006 7007 7008 7009 7010 7011 7012 7013 7014 7015 7016 7017 7018 Keystroke Break...
Page 383 Glossary Aperture. The opening in an optical system defined by a lens or baffle that establishes the field of view. API. An interface by means of which one software component communicates with or controls another. Usually used to refer to services provided by one software component to another, usually via software interrupts or function calls Application Programming Interface.
Page 384 Character Set. Those characters available for encoding in a particular bar code symbology. Check Digit. A digit used to verify a correct symbol decode. The scanner inserts the decoded data into an arithmetic formula and checks that the resulting number matches the encoded check digit. Check digits are required for UPC but are optional for other symbologies.
Page 385 Decryption. Decryption is the decoding and unscrambling of received encrypted data. Also see, Encryption and Key . Depth of Field. The range between minimum and maximum distances at which a scanner can read a symbol with a certain minimum element width.
Page 386 IEC (825) Class 1. This is the lowest power IEC laser classification. Conformity is ensured through a software restriction of 120 seconds of laser operation within any 1000 second window and an automatic laser shutdown if the scanner's oscillating mirror fails.
Page 387 Laser Diode. A gallium-arsenide semiconductor type of laser connected to a power source to generate a laser beam. This laser type is a compact source of coherent light. Laser Scanner. A type of bar code reader that uses a beam of laser light. LCD. See Liquid Crystal Display .
Page 388 Glossary - 6 Symbol DS6707 Digital Imager Scanner Product Reference Guide MIN are the same value for voice cellular users. International roaming considerations often result in the MDN being different from the MIN. MIL. 1 mil = 1 thousandth of an inch.
Page 389 RD the reflectance factor of the dark bars. Programming Mode. The state in which a scanner is configured for parameter values. See Scanning Mode . Quiet Zone. A clear space, containing no dark marks, which precedes the start character of a bar code symbol and follows the stop character.
Page 390 Symbol DS6707 Digital Imager Scanner Product Reference Guide Scanner. An electronic device used to scan bar code symbols and produce a digitized pattern that corresponds to the bars and spaces of the symbol. Its three main components are: 1) Light source (laser or photoelectric cell) - illuminates a bar code,;...
Page 391 Symbology. The structural rules and conventions for representing data within a particular bar code type (e.g. UPC/EAN, Code 39, PDF417, etc.). TCP/IP. (Transmission Control Protocol/Internet Protocol) A communications protocol used to internetwork dissimilar systems. This standard is the protocol of the Internet and has become the global standard for communications. TCP provides transport functions, which ensures that the total amount of bytes sent is received correctly at the other end.
Page 392 Glossary - 10 Symbol DS6707 Digital Imager Scanner Product Reference Guide Visible Laser Diode (VLD). A solid state device which produces visible laser light. Warm Boot. A warm boot restarts the mobile computer by closing all running programs. All data that is not saved to flash...
Page 393 Index Numerics 123Scan parameters ......9-1 2D bar codes aztec ....... . 10-77 aztec inverse .
Page 394 Index - 2 Symbol DS6707 Digital Imager Scanner Product Reference Guide code lengths ......11-18 code types .
Page 395 GS1-128 ......10-25 I 2 of 5 check digit verification ... . . 10-44 I 2 of 5 convert to EAN-13 .
Page 396 UPC composite mode ....10-69 configurations, scanner ......xv connecting interface cable .
Page 397 MicroPDF417 bar codes ....10-71 Motorola enterprise mobility support ... . . xvii mounting desk mount .
Page 398 Index - 6 Symbol DS6707 Digital Imager Scanner Product Reference Guide QR code bar codes ......10-75 RS-232 connection .
Page 399 We’d like to know what you think about this Manual. Please take a moment to fill out this questionnaire and fax this form to: (631) 738-4913, or mail to: Motorola, Inc. One Motorola Plaza M/S B-10 Holtsville, NY 11742-1300 Attention:...
Page 402 1-800-927-9626 http://www.motorola.com/enterprisemobility MOTOROLA and the Stylized M Logo and Symbol and the Symbol logo are registered in the U.S. Patent and Trademark Office. All other product or service names are the property of their respective owners. © Motorola, Inc. 20089...

This manual is also suitable for:

Ds6707-dp20411zzr - symbol digital scanner ds6707-dp Ds6707-sr20007zzrDs6707

Symbol DS6707 Product Reference Manual

About this Guide

Chapter 1 Getting Started

Chapter 2 Scanning

Chapter 3 Maintenance & Technical Specifications

Chapter 4 User Preferences & Miscellaneous Digital Imager Scanner Options

Chapter 5 Imaging Preferences

Chapter 6 SSI Interface

Chapter 7 USB Interface

Chapter 8 RS-232 Interface

Chapter 9 123Scan

Chapter 10 Symbologies

Chapter 11 Advanced Data Formatting

Quick Links

Related Manuals for Symbol SYMBOL DS6707

Summary of Contents for Symbol SYMBOL DS6707