Connecting An Rs-232 Interface - Symbol DIGITAL DS6708 Product Reference Manual

7 - 2 Symbol DS6708 Digital Scanner Product Reference Guide

Connecting an RS-232 Interface

Connect the digital scanner directly to the host computer.
Serial Port Connector to
RS-232 Direct Connection
Figure 7-1
Serial Port
Connector to Host
RS-232 Direct Connection for Scanner with Base
Figure 7-2
NOTE Interface cables vary depending on configuration. The connectors illustrated in
are examples only. The connectors may be different than those illustrated, but the steps to connect the
scanner are the same.
Attach the modular connector of the RS-232 interface cable to the cable interface port on the digital scanner
1.
(see Installing the Interface Cable on page
Host
Power Supply Cable
Power Supply Cable
Interface Cable
Base
Interface Cable
1-3).
Figure 7-1 and Figure 7-2