Phone; Making A Phone Call D - Motorola HT1250 User Manual

PHONE

If your radio has access to a telephone system,
you can make a phone call. To do this, your
radio must send an access code to a station
that connects it to a phone line. (Ask your dealer
for more details.) After completing a call, your
radio must send a deaccess code to hang up.
Note: In order to receive a phone call, your
radio must have a DTMF decode board
installed. Ask your dealer for details.

MAKING A PHONE CALL D

You can make a phone call by using the
preprogrammed Phone button (see page 11)
or the menu. D will appear on the LCD screen
when you are in Phone Mode.
To initiate a phone call:
Press the Phone Button.
–
or–
Do the following:
)
1
to enter Menu Mode.
+ ?
2 Phone
or until
)
Phone
3
to select
4 You will hear a series of tones, indicating that
an access code is being sent automatically,
and see your access code;
–
or–
(for full-keypad radios only) enter your access
code using the keypad.
5 When you hear a dial tone:
(For full-keypad radios only) enter the phone
number using the keypad.
–
or–
+ ?
or to select a number from the
phone list; then press the PTT button to send it.
–
or–
(For full-keypad radios only)
a Press and release the preprogrammed
Speed Dial button (see page 11) to use
the Speed Dial feature.
b Press the key (1 to 9) corresponding to the
number you want to call, or press "0" if you
want to call the last number dialed.
Phone
Phone
37
English