Table of Contents
Advertisement
MN004476A01-AN
Chapter 4: Status Indicators
You Hear
Tone Name
Short, High-
Low-Battery Chirp
Pitched
Tone (Chirp)
Two High-
GPS Fails
Pitched
Tones
Ringing
Fast Ringing
Enhanced Call Sent
Phone Call Received
Gurgle
Dynamic Regrouping
Talk Permit
Unique,
New Message
Low-Pitched
Chirp
Unique,
Priority Status
High-Pitched
Chirp
Incremental-
Bluetooth Paired
Pitched
Bluetooth Connected
Tone
Decremen-
Bluetooth Unpaired
tal- Pitched
Bluetooth Disconnected
Tone
A Group of
Fall Alert Continuous
Very High-
Tone
Pitched
Critical Fall Alert Con-
Tones
tinuous Tone
Unique Low-
Enhanced Zone Bank
High Tone
Up
Unique
Enhanced Zone Bank
High-Low
Down
Tone
4.8
Phone Call Displays and Alerts
The following phone call displays and alerts appears on the radio display when you make and receive phone
calls. The radio also uses alert tones to indicate the current status.
36
Heard
When battery is below preset threshold value.
When the GPS fails or loses signal.
When system is searching for target of Private Call.
When waiting for target of Private Call to answer the call.
When a land-to-mobile phone call is received.
(When PTT button is pressed) a dynamic ID has been
received.
(When PTT button is pressed) is verifying with the system
for accepting its transmissions.
When a new message is received.
When a priority message is received.
When Bluetooth accessory is paired with the radio.
When Bluetooth accessory is connected to the radio.
When Bluetooth accessory is unpaired from the radio.
When Bluetooth accessory is disconnected from the radio.
When radio is in Fall Alert mode and prepares to transmit
Emergency Alarm when the timer of this alarm ends.
When radio is in Fall Alert Enhanced mode and prepares
to transmit Emergency Alarm when the timer of this alarm
ends.
When EZB Up button is pressed to scroll the Enhance
Zone Bank up.
When EZB Down button is pressed to scroll the Enhance
Zone Bank down.
Advertisement
Table of Contents
