Mazda 2012 CX-9 Owner's Manual page 402

Interior Comfort
Bluetooth Hands-Free (Panel Operation)
CAUTION
The types of devices (Mobile phone)
which can be connected to the
hands-free unit are limited.
Therefore, before purchasing or
changing your device (Mobile phone)
model, consult Mazda Bluetooth
Hands-Free Customer Service or visit
www.MazdaUSA.com/bluetooth for a
complete list of compatible phones.
Devices (Mobile phone) which can be
connected to the hands-free system
need to be compliant with Bluetooth
specifications and the appropriate
profile. However, even among these
Bluetooth devices (Mobile phone) are
some which will not connect with
your Mazda or will have limited
function. Therefore, consult Mazda
Bluetooth Hands-Free Customer
Service for information regarding
device (Mobile phone) compatibility:
Phone: 800-430-0153
Web: www.MazdaUSA.com/
bluetooth
Applicable Bluetooth specification
Ver. 2.0 or higher
Response profile
HFP (Hands Free Profile) Ver. 1.5
l
DUN (Dial-up Networking Profile)
l
Ver. 1.1
PBAP (Phone Book Access Profile)
l
Ver. 1.0
A2DP (Advanced Audio Distribution
l
Profile) Ver. 1.0
AVRCP (Audio/Video Remote Control
l
Profile) Ver. 1.0/1.3
6-160
OPP (Object Push Profile) Ver. 1.1
l
Bluetooth is the registered trademark of
Bluetooth SIG. Inc.
NOTE
The Bluetooth Hands-Free system is
l
operable several seconds after turning the
ignition switch to the ACC or ON position
(requires less than 15 seconds).
If the ignition switch is turned off during a
l
hands-free call, the line is transferred to the
device (Mobile phone) automatically.
If the device (Mobile phone) is in a location
l
where radio reception is difficult such as a
metal container or in the trunk, the call may
not be connected using Bluetooth. If
communication is not possible, change the
location of the device (Mobile phone).
qComponent Parts
Bluetooth Hands-Free consists of the
following items:
Audio unit
l
Pick-up button
l
Hang-up button
l
Audio unit
The audio unit can be used for Bluetooth
Hands-Free activation, making calls,
hanging up, device programming, device
selection, device deletion, device
information display, import contact, and
volume adjustment.