Mazda 2012 CX-9 Owner's Manual page 396

Interior Comfort
Bluetooth Hands-Free (Voice Recognition)
1. Press the pick-up button (with/without
navigation system) or talk button with
a short press (without navigation
system) or a long press (with
navigation system).
NOTE
For vehicles with the navigation system, you
can also press the voice recognition/hands-free
switch with a short press and say: [Beep]
Telephone or Phone .
2. Say: [Beep] Setup
3. (Type A)
Prompt: Select one of the following:
Pairing options, confirmation prompts,
language, passcode, or select phone.
(Type B/Navigation system)
Prompt: Select one of the following:
Pairing options, confirmation prompts,
language, passcode, select phone or
select music player.
4. Say: [Beep] Confirmation prompts
5. Prompt: Confirmation prompts are
on/off. Would you like to turn
confirmation prompts off/on?
6. Say: [Beep] Yes
7. Prompt: Confirmation prompts are
off/on, returning to main menu.
6-154
qVoice Recognition Learning
Function (Speaker Enrollment)
The voice recognition learning function
enables voice recognition appropriate to
the characteristics of the user's voice.
If the recognition of the voice input
commands to the system is not adequate,
this function can largely improve the
system's voice recognition of the user. If
your voice can be recognized sufficiently
without using this function, you may not
realize the added benefit of the function.
To register your voice, the voice input
command list must be read out. Read out
the list when the vehicle is parked.
Perform the registration in as quiet a place
as possible (page 6-133).
The registration must be performed
completely. The required time is a few
minutes. The user needs to be seated in
the driver's seat with the voice input
command list for voice recognition
learning open to the page indicated below.
When voice recognition learning is
done for the first time
1. Press the pick-up button (with/without
navigation system) or talk button with
a short press (without navigation
system) or a long press (with
navigation system).
NOTE
For vehicles with the navigation system, you
can also press the voice recognition/hands-free
switch with a short press and say: [Beep]
Telephone or Phone .
2. Say: [Beep] Voice training