Mazda 2012 CX-9 Owner's Manual page 380

Interior Comfort
Bluetooth Hands-Free (Voice Recognition)
4. (Type A)
Prompt: Select one of the following:
Pairing options, confirmation prompts,
language, passcode, or select phone.
(Type B/Navigation system)
Prompt: Select one of the following:
Pairing options, confirmation prompts,
language, passcode, select phone or
select music player.
5. Say: [Beep] Pairing options
6. Prompt: Select one of the following:
Pair, edit, delete, or list.
7. Say: [Beep] Pair
8. Prompt: Please say a 4-digit pairing
code.
9. Say: [Beep] XXXX (Speak an
arbitrary 4-digit pairing code. This can
be any combination of 4 numbers.)
NOTE
Some devices accept only a particular
l
pairing code (Usually, 0000 or 1234 ).
If pairing cannot be completed, refer to the
owner's manual of your mobile device, and
try those numbers if necessary.
Record the code as it will be used to
l
program your device in Step 16.
10. Prompt: Pairing code XXXX (4-
digit number). Is this correct?
11. Say: [Beep] Yes or No
12. If Yes , go to Step 13.
If No , the procedure returns to Step
8.
13. Prompt: Start pairing procedure on
the device. See the device manual for
instructions.
14. Using the device, perform a search
for the Bluetooth device (Peripheral
device).
6-138
NOTE
For the operation of the device, refer to its
instruction manual.
15. Select Mazda from the device list
searched by the device.
16. Input the 4-digit pairing code set in
Step 9 to the device.
17. Prompt: Please say the name of the
device after the beep.
18. Say: [Beep] XXXX - - - (Speak a
device tag , an arbitrary name for
the device.)
Example: Stan's device.
NOTE
Speak a programmed device tag within 10
seconds.
If more than two devices are to be
programmed, they cannot be programmed with
the same or similar device tag .
19. Prompt: Adding XXXXXX - - -
(Ex. Stan's device ) (Device tag). Is
this correct?
20. Say: [Beep] Yes
21. Prompt: Pairing complete
After a device is registered, the system
automatically identifies the device. By
activating Bluetooth Hands-Free again, or
by activating Bluetooth Hands-Free first
after turning the ignition switch from the
LOCK to the ACC position, the system
reads out a voice guidance, XXXXXX -
- - (Ex. Stan's device ) (Device tag) is
connected .