Power Over Ethernet; Unpacking And Inspecting The System - ADTRAN NetVanta 7000 Series Hardware Installation Manual

Hide thumbs Also See for NetVanta 7000 Series:

Table of Contents

Introduction

Power Over Ethernet

The NetVanta 7100 PoE interfaces provide the ability to detect attached powered devices (PDs) and deliver

48 VDC to the PD via existing CAT5 cabling. The PoE interfaces are fully compliant with the IEEE

802.3af power over Ethernet standard. By default, the PoE ports automatically discover and provide power

to IEEE-compliant PDs.

Each NetVanta 7100 unit is shipped in its own cardboard shipping carton. Open each carton carefully and

avoid deep penetration into the carton with sharp objects. After unpacking the unit, inspect it for possible

shipping damage. If the equipment has been damaged in transit, immediately file a claim with the carrier

and contact ADTRAN Customer Service (refer to Repair and Return on page 8).

Contents of ADTRAN NetVanta 7100 Shipments

The NetVanta 7100 unit ships with the following items:

•

NetVanta 7100 base unit

•

A detachable power cable with a grounded, three-prong plug

•

ADTRAN OS System Documentation CD

•

Quick Start Guide

•

Warranty Card

61200796L1-34D

NetVanta 7000 Series Hardware Installation Guide

Table of Contents

Table of Contents