Mazda 2013 Mazda3 Owner's Manual page 312

Interior Comfort
Bluetooth Hands-Free
7. The voice guidance reads out the voice
input command number (refer to the
voice input command list for voice
recognition learning). (Ex. Please read
phrase 1 )
8. Say: [Beep] 0123456789 (Say the
voice input command for voice
recognition learning (1 to 8) according
to the voice guidance.)
9. Prompt: Speaker enrollment is
complete, returning to main menu.
NOTE
If an error occurred in the voice recognition
learning, re-learning can be done by pressing
the talk button with a short press.
Voice input command list for voice
recognition learning
When reading out, the following points
must be observed:
Read out the numbers one at a time
l
correctly and naturally.
(For example, 1234 must be read out
one, two, three, four , not twelve, thirty
four .)
Do not read out parentheses. ( and
l
hyphens - are used for separating
numbers in a phone number.
Ex.
(888) 555-1212 must be spoken Eight,
eight, eight, five, five, five, one, two, one,
two.
Phrase
1 0123456789
2 (888) 555-1212
3 Call
4 Dial
5 Setup
6 Cancel
7 Continue
8 Help
6-90
Command
NOTE
The applicable phrase appears in the
l
display.
After user voice registration is completed,
l
voice guidance Speaker enrollment is
complete, returning to main menu is
announced.
Voice recognition learning on/off
1. Press the pick-up button or talk button
with a short press.
2. Say: [Beep] Voice training
3. Prompt: Enrollment is enabled/
disabled. Would you like to disable/
enable or retrain?
4. Say: [Beep] Disable or Enable
5. When Disable is spoken, the voice
recognition learning is turned off.
When Enable is spoken, the voice
recognition learning is turned on.
6. Prompt: Speaker Enrollment is
disabled/enabled, returning to main
menu.