Mazda 2013 Mazda3 Owner's Manual page 291

3. The name of the Bluetooth unit device
is displayed.
4. Rotate the audio control dial to select
the information for the Bluetooth unit
which you would like to view.
NOTE
When GO BACK is selected, the display
returns to DEVICE INFO .
5. When the audio control dial is pressed
the information is displayed.
qHow to use the Bluetooth Audio
system
Switching to Bluetooth audio mode
To listen to music or voice audio recorded
to a Bluetooth audio device, switch to the
Bluetooth audio mode to operate the
audio device using the audio system
control panel.
Any Bluetooth audio device must be
programmed to the vehicle's Bluetooth
unit before it can be used. (Refer to
Bluetooth audio device programming )
1. Switch the ignition to ACC or ON.
Device name
BT address
Bluetooth Audio
2. Turn on the Bluetooth audio device's
power.
Make sure that the
displayed in the information display.
The symbol is not displayed if an
unprogrammed Bluetooth audio device
is being used or the vehicle's Bluetooth
unit has a malfunction.
NOTE
Some Bluetooth audio devices need a certain
amount of time before the
displayed.
3. Press the AUX button to switch the
Bluetooth audio mode to BT Audio .
4. The audio recorded to the Bluetooth
audio device begins playback.
NOTE
If the Bluetooth audio device does not begin
l
playback, press the Play/Pause button
( ).
If the mode is switched from Bluetooth
l
audio mode to another mode (radio mode),
audio playback from the Bluetooth audio
device stops.
If a call is received on a hands-free mobile
l
phone during playback from the Bluetooth
audio device, the playback is stopped.
Playback from the Bluetooth audio device
resumes after the call ends.
Playback
1. To listen to a Bluetooth audio device
over the vehicle's speaker system,
switch the mode to Bluetooth audio
mode. (Refer to
Switching to Bluetooth audio mode )
2. To stop playback, press the Play/Pause
button ( ).
3. Press the button again to resume
playback.
Interior Comfort
symbol is
symbol is
6-69