Speaker - HP ProDesk 480 G3 MT Maintenance And Service Manual
Business pc
Hide thumbs
Also See for ProDesk 480 G3 MT:
- Disassembly instructions manual (11 pages) ,
- Hardware reference manual (47 pages)
Table of Contents
Advertisement
NOTE:
After installing a new processor onto the system board, update the system ROM to ensure that the
latest version of the BIOS is being used on the computer. The latest system BIOS can be found on the Web at:
http://h18000.www1.hp.com/support/files.
Speaker
1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
From the outside front of the chassis, remove the Torx screw that secures the speaker to the front of the
chassis.
4.
From the inside of the chassis, disconnect the speaker cable from the system board connector labeled
SPKR.
NOTE:
5.
Remove the speaker cable from the clip built into the base of the chassis (1).
58
Chapter 4 Removal and replacement procedures: Microtower
(Access panel on page
System board appearance may vary.
(Preparation for disassembly on page
24).
23).
Hide quick links:
Advertisement
Table of Contents
