Toshiba 19LV610U-T Owner's Manual page 20

Connections
Optional equipment connections
You can enjoy high quality dynamic sounds by connecting the TV to an optional audio equipment.
Optional audio equipment connection reminders
• DO NOT connect the Coaxial Digital Audio OUT jack of the TV to the RF input of a Dolby Digital receiver. This input
on your receiver is reserved for Laserdisc use only and is incompatible with the Coaxial Digital Audio OUT jack on the
TV.
• Your TV has a wide dynamic range output sound. Be sure to adjust the receiver's volume to a moderate listening level
to prevent damaging the speakers and harming your hearing from sudden high volume sound.
• When using an external audio amplifier, make sure the volume on both the TV and the amplifier is set to a reasonable
listening level.
Connecting to an amplifier equipped with a Dolby
Dolby Digital
Dolby Digital is the surround sound technology used in movie theaters. This technology is now readily available for home
entertainment. You can enjoy motion picture and live concert DVD encoded via the Dolby Digital recording system by
connecting your TV to a 6-channel amplifier equipped with a Dolby Digital decoder or a Dolby Digital processor.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
20
Downloaded from www.Manualslib.com
To Coaxial Type
Digital Audio IN
75
To Coaxial Type
Digital Audio IN
75
manuals search engine
(continued)
The succeeding sections use the following reference marks.
: Front speaker
: Rear speaker
: Subwoofer
coaxial
cable (not supplied)
coaxial cable (not supplied)
: Center speaker
: Signal flow
®
Digital decoder
19- and 22-inch models
To Coaxial Digital Audio OUT
26-inch model
To Coaxial Digital Audio OUT