Cirrus SR22 Pilot's Operating Handbook And Flight Manual page 405

Cirrus Design
SR22 / SR22T
Section 4 - Normal Procedures
Before Starting Engine
1. Preflight Inspection ...................................................COMPLETED
Ensure that the airplane is properly loaded and within the
AFM's weight and balance limitations prior to takeoff.
2. Weight and Balance............................................Verify within limits
3. Emergency Equipment ................................................ ON BOARD
4. Passengers ..................................................................... BRIEFED
Ensure all the passengers have been fully briefed on smoking,
the use of the seat belts, doors, emergency exits, egress
hammer, and CAPS.
Additionally, ensure all passengers have been briefed not to
touch and/or obstruct the control yokes or rudder pedals. The
pilot will demonstrate the full-extension of the controls so that
the passenger will understand needed clearances.
Verify CAPS handle safety pin is removed.
5. Passenger Door ..............................................................LATCHED
From outside of aircraft verify both top and bottom latch of
door is securely latched. Press firmly at each door latch
position to ensure the security of door.
6. Seats, Seat Belts, and Harnesses ................ADJUST & SECURE
Crew seats must be locked in position and control handles
fully down before flight. Ensure seat belt harnesses are not
twisted.
P/N 13772-142
Original Issue: 10-14-09
• WARNING •
• Note •
• Note •
• Caution •
Section 9
Supplements
11 of 14