Section 3A
Abnormal Procedures
Landing Gear System
Brake Failure During Taxi
1. Engine Power ......................................................... AS REQUIRED
• To stop airplane - REDUCE
• If necessary for steering - INCREASE
2. Directional Control ...............................MAINTAIN WITH RUDDER
3. Brake Pedal(s)...................................................................... PUMP
If directional control can not be maintained:
4. Ignition Switch ..........................................................................OFF
Amplification
Ground steering is accomplished by differential braking. However,
increasing power may allow some rudder control due to increased
groundspeed and airflow over the rudder.
Left/Right Brake Over-Temperature
BRAKE TEMP Caution
1. Stop aircraft and allow the brakes to cool.
Amplification
Brake temperature is between 270°F and 293°F for more than 5
seconds. Refer to Section 10,
for additional information.
3A-20
BRAKE TEMP
Taxiing, Steering, and Braking Practices
Cirrus Design
SR22
P/N 13772-004
Original Issue