6.Fan Coil G- - Terminal Label; Furnace - Carrier SYSTXCCITN01-A Installation Instructions Manual

Shutdown: This setup option selects the change of state required for shutdown. .
Select Normally Open or Normally Closed, and then save your selection.
6.3.2.6. Fan Coil G Terminal Alert Label
Once the G Terminal Alert label has been entered, it is shown both on the main
screen and in the notification email when the alert becomes active.
6.3.3.

Furnace

First touch SETUP, then touch FURNACE to set up the parameters for the furnace
unit.
34
A13231
A14224