JVC KD-ADV6270 Instructions Manual page 332

Dvd/cd receiver
Hide thumbs Also See for KD-ADV6270:
Table of Contents

Advertisement

Title assignment
• If you try to assign titles to more than 30
station frequencies or 30 CDs, "NAMEFULL"
appears. Delete unwanted titles before
assignment.
• Titles assigned to CDs in the CD changer can
also be shown if you play back the disc from
the unit and vice versa.
General settings—PSM
• If you change the "AMP GAIN" setting from
"HIGH PWR" to "LOW PWR" while the
volume level is set higher than "VOL 30," the
unit automatically changes the volume level to
"VOL 30."
Disc setup menu
• When the language you have selected is not
recorded on a disc, the original language is
automatically used as the initial language. In
addition, for some discs, the initial languages
settings will not work as you set due to their
internal disc programming.
• When you select "16:9" for a picture whose
aspect ratio is 4:3, the picture slightly changes
due to the process for converting the picture
width.
• Even if "4:3 PAN SCAN" is selected, the
screen size may become "4:3 LETTER BOX"
for some discs.
On-screen guide icons
During playback, the following guide icons
may appear for a while on the monitor.
DVD: Appears at the beginning of a scene
containing:
: Multi-subtitle languages
: Multi-audio languages
: Multi-angle views
:
Playback
:
Pause
: DVD-Video/VCD: Forward slow
motion
: DVD-Video: Reverse slow motion
: Forward search
: Reverse search
About sounds reproduced through the rear
terminals
• Through the analog terminals (Speaker
out/LINE OUT/2nd AUDIO OUT):
2-channel signal is emitted. When
playing a multi-channel encoded disc,
multi-channel signals are downmixed.
(AUDIO—DOWN MIX: see page 29.)
• Through DIGITAL OUT (optical):
Digital signals (Linear PCM, Dolby Digital,
DTS, MPEG Audio) are emitted through
this terminal. (For more details, see page
35.)
To reproduce multi-channel sounds
such as Dolby Digital and DTS, connect
an amplifier or a decoder compatible
with these multi-channel sources to this
terminal, and set "DIGITAL AUDIO
OUTPUT" correctly. (See page 29.)
• About Dual Zone:
Through the 2nd AUDIO OUT, 2-channel
signal is emitted. When playing a multi-
channel encoded disc, multi-channel
signals are downmixed. (See page 23.)
34

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kd-dv6200

Table of Contents