Viessmann VITODENS 200-W Installation Instructions Manual page 17

Vitodens 200-W B2HA 112, 150 Installation
Boiler Mounting
(continued)
Note: The connection box cover and the front encloser
panel may have been already removed during
unpacking.
1. Remove the external accessories connection box
cover.
2. Loosen the screws at the bottom of the boiler
(do not remove completely).
3. Remove the front encloser panel (lift up and pull
away from the boiler).
4. Mount boiler onto the mounting bracket.
Note: For either wall or floor mounting.
5. Adjust the levelling screws to ensure the boiler
is level.
Note: For draining of the condensate (see page 28).
6. Install supplied installation fittings as per layout
(see page 13).
CAUTION
The boiler must be level both vertically and horizontally
to ensure proper draining of the condensate.
Boiler Connections
17