Set-Up; Remove The Boiler Packaging - Viessmann VITODENS 200-W Installation Instructions Manual

Set-up

Removing the Boiler Packaging
10
Vitodens 200-W B2HA 112, 150 Installation
Note: Visually inspect equipment packaging for damage.
If damage is discovered, carefully remove the
packaging and note any evidence of damage to
the equipment. Save the shipping container for
inspection by the carrier if damage has occurred.
1. Remove shipping carton.
2. Remove packing material and set aside for later use.
3. Remove the external accessories connection box
cover.
4. Loosen the screws at the bottom of the boiler
(do not remove completely).
5. Remove the front encloser panel (lift to the top and
pull away from the boiler).
6. Use the top packing material and place it on the
bottom of the boiler for support when lifting the
boiler to the upright position.