Upgrading The Software - Panasonic KX-TDA600 Feature Manual

1.18 U
1.18 U

1.18.1 Upgrading the Software

Description
It is possible to upload software from a PC to the PBX to upgrade the following:
Main Processing (EMPR/MPR) software
data
Default system programming data for each
country/area
Language data for PT display
LPR (software on a slot card) software data
(KX-TDA100/KX-TDA200/KX-TDA600 only)
Cell Station (CS) software data
Conditions
• The software version of the EMPR or MPR card can be confirmed through system programming.
Installation Manual References
KX-TDA100/KX-TDA200
2.3.1 MPR Card
KX-TDA600
2.3.1 EMPR Card
Programming References
PC Programming Manual
2.8.3 [1-1] Slot—Card Property - MPR—Memory Version:
PT Programming Manual
[190] Main Processing (MPR) Software Version Reference
314 Feature Manual
Data File Storing Area
Operating system data area on either the EMPR card of the
KX-TDA600, the MPR card of the KX-TDA100/KX-TDA200,
or the Main Board of the KX-TDA50.
Country/area data area on the EMPR card, MPR card, or
Main Board
Each language data area on the EMPR card, MPR card, or
Main Board.
There are two types:
Type 1: Proprietary Telephone (PT) display except for PT
system programming (→ 1.13.28 PT Programming) (five
languages max.)
Type 2: PT system programming data (one language max.)
Flash ROM on the appropriate optional services card (e.g.,
DHLC, DLC, T1, PRI, etc.)
Flash ROM on the CS