Panasonic KX-TDA600 Feature Manual page 237

PBX Code Method (MPR Software File Version 5.0000 or later)
PBX-1 (PBX
Code: 20)
Mailbox 101
Mailbox 201
Extn.
Mailbox 730101
101
Mailbox 730102
VPS
[Explanation]
Extension 102 does not answer the CO line call, so the call is forwarded to the VPS, using a VPS mailbox
number containing the TIE line access number, the PBX code of the PBX that received the call, and the
extension number that received the call.
This mailbox number is the same as if an extension connected to PBX-1 called extension 102 of PBX-2.
This mailbox number should be programmed as the mailbox number and owner extension number on the
VPS.
Multiple VPSs
More than one PBX in the network can have a VPS connected, and each VPS can provide voice mail
services for extensions connected to other PBXs in the network.
Conditions
• Hardware Requirement
The KX-TDA6920, KX-TDA0920 or KX-TDA5920 SD Memory Card for Software Upgrade to Enhanced
Version must be installed in the PBX connected to the VPS, and in all PBXs that will use this feature.
• All PBXs in the network must be KX-TDA or KX-TDE series PBXs.
• For information on the hardware requirements for KX-TDE series PBXs that share the same VPS, refer
to the KX-TDE Feature Manual.
• Only KX-TVA series VPSs connected using DPT integration support this feature.
• Mailboxes for extensions connected to other PBXs in the network must be set up manually.
• An extension can receive Message Waiting notifications from multiple VPSs connected to PBXs in the
network. When multiple notifications of the number of unheard messages in an extension user's
message box are sent from different VPSs, the most recent notification will be displayed.
Telephone Company
Private network
Mailbox 730102:
"Hello. I am not at
my desk right now."
"7-30-102"
[PBX
code]
[Extn. no.]
[TIE line
access no.]
TIE Line Network
PBX-2 (PBX
Code: 30)
Extn.
Extn. 102
101
Fwd to VPS
1.13 P
Outside Caller
PBX-3
PBX-4
PBX-5
PBX-6
PBX-7
PBX-8
Feature Manual 237